Sound Insulation Office Partition Wall Panels With Shorter Time Building

Sound Insulation Partition Wall Panels With Shorter Time Building

Specifications:

Description:

1) Composition:?cement and EPS polystyrene form as core,?calcium silicate board as face panel on both sides.

2) Advantages:

Are?you still working in dirty and wet construction site, moving many heavy machines to the site? Are you still waiting for more than half a year before you can move inside to your new house? Are you still paying high salary to the workers and still unhappy about the final work? Are you still...?

You?are so lucky to be here and get to know the best construction materials---eps cement sandwich panels. Comparison with other wall materials, this one is more stronger and 70 years long lifespan with following details:

Application:

Installation Process:

1. Setting the line and carrying the board into position
2. Using a hand-hold electric saw to the sizes needed
3. Sizing cement on tenon side of two boards, then spread polymer mortar on one tenon side casually
4. Carrying the board prepared to be installed to the installation place, correcting the wall board by Special tools, and making it close tightly, and let the polymer mortar squeeze out into full and then fixing it with a wedge temporarily
5. Planting bars in wall and pillar: drill a hole in the original pillar or wall, and fix the board by steel bars?
6. Correcting and fixing: Using a guiding rule to check the vertical and leveling correction.
7. Planting bars in structure beam: drill a hole in structure beam and plant a reversed 7-shaped steel bar to fix with wall board
8. Planting bars in floor: drill a hole in the floor and plant a 7-shaped steel bar to fix with wall board
9. Planting bars between two boards, plant a steel bar in the angle of 45 degree to fix
10. Installing electrical wires and switches: setting lines on the places needing to be set with concealed wire and switch box
11. Grouting and filling starch: filling and sticking the corrected wall board with polymer mortar
12. Sticking anti-cracking tape?
After the polymer and wall are all shaped, sticking glass-cloth or anti-cracking tape, brushing coating.?

Partition Wall Panels:

Our Clients: