Industrial Horizontal Injection Machine Swing Arm Robot With 90 Degree Gripper

Industrial ?Horizontal Injection Machine Swing Arm Robot With 90 Degree Gripper

Description:

single stage and telescopic type. The single function is to clamp products, and the full function is to take-out products and sprues. After installed this robot, the productivity will be increased 10~30%, reduce defective rate, ensure safety of operators, reduce manpower and accurately control the output to reduce waste.

Swing Arm Robot- (for Horizontal IMM use)

Swing-Arm Robots are extensively applied to horizontal / vertical plastic injection machines ranging from

50T~ 250T which can rapid take out the runners, runner and finished products from the mold of plastic

injection molding machines, and place runners or runner into beside-the-press granulator for recycling

immediately.?

There are two types of arms-single stage and telescopic.? The vertical stroke for single

stage is 550mm and for telescopic is 650mm.? This series equipped with wrist rotation mechanism and

gripper sensor can rotate products with 90°.

Structural Units

Employed high strength & tension aluminum alloy to work with precise linear guide way, features with light

weight, wear resistance, long service life.

Wrist Rotation Mechanism

The arm front section for installing gripper can rotate 90°; absorbs & gripper jig can be installed with

sensor device for detecting to get products or not.

Function Features

1. X axis can rotate 90° which is for changing molds conveniently, equipped with hydraulic shock absorber

? ?for making forward & backward stroke more stable and smooth. ?

2. Y axis is equipped with device to avoid pneumatic cylinder falling.

3. Z axis can be adjusted angle from 45°~90° for placing finished parts by different direction according to

? ? requirement? ( to place parts at the operate side or non-operate side of injection molding machines).

Safety Protection

External signal interlock with injection molding machine to have double safety protection for molds to

ensure no locking molds if parts are not taken out via the signal confirmation of finished product removal.

Control System

Palm controller, friendly operation interface, easy operation.

Model Features

X-650PR are mainly used for removal of runner & runner and finished products from 3 plate mold

simultaneously and any arm can be used independently for remove finished parts or runner.

Specification