3D wire mesh panel

Place of Origin	China
Model Number	09

Anping County Xincheng Hardware Wire Mesh Products Co., Ltd.Contacts: nino (Sell Director) E-mail: sales02 @ wiremesh-sell .com    MSN Online: nino-hao @ hotmail .com           RUL: www . wiremesh-sell . com

3D wire mesh panel is a new wire mesh products, mainly used in construction. It's high tensile and easy install are very popular by world construction customers. 3d wire mesh panel also called two double layer welded wire panel, using welded way join two pieces of welded wire panel together. Foamed polystyrene insulating layer with the thickness of 100m/m in the center, steel wire truss coated with zinc of 3m/m(3.8mm) between the insulating layer is pinned at 2`` intervals, at both sides of which forms up at 5Cm X 5Cm(5Cm X 10Cm) intervals with the wire mesh coated with zinc of 3m/m(3.8mm) that is at fine-spun 50m(100m)intervals. So the whole points of contact in all steel wires is joined in a spot welding, which is a panel of 2.4m(4m) full length, 1.2m width, 60~200m/m thickness. Material: 1. Steel wire : steel wire with a diameter of 3mm(3.8mm) licensed by KSM O802 and coated with zinc in a tensile strength of 60~120kg/Cm2 2. Foamed polystyrene : licensed by KSM 3802 with a specific gravity of over 0.015kg/Cm2. (Over 0.015kg/Cm2 is for the manufacturing order). size is 2", 2.5" and 4". 3. Strength of Mortar : Normally 1:3 (70kg/Cm2) Anping County Xincheng Hardware Wire Mesh Products Co., Ltd. Contacts: nino (Sell Director) E-mail: sales02 at MSN Online: nino-hao at RUL: