cap molding machine

Main technical parameters

Model

JF-30(16T)

Number of die head

16 cavities

Productivity(pc/h)

8000-11000pcs/h

Total electrical power(KW)

35KW

Min cap diameter (mm)

22mm

Max cap diameter (mm)

45mm

Min cap height (mm)

10mm

Max cap height (mm)

25mm

Power supply

380V, 50Hz

Air distribution need (approximate)

6kgs, 500NL/hr

Weight (Kg)

2500Kg

Volume (L*W*H)

2700×1150×2100mm

Introduction

The plastic cap hydraulic molding machine has 16/24 cavities to produce lids/caps for CSD and mineral water bottles.
The machine makes CSD and mineral water bottle caps from granular plastic raw material which is fed via the hopper, fluidized with high temperature, and then forms die block that is extruded from the discharge outlet of the extruder, cut with the cutting tray, uniformly distributed into each die cavity and finally mold pressed. Bottle caps made through this technique features superior internal face quality and beautiful appearance, and are free from injection point and flow waste.
It is characterized by easy operation and economy in electricity, water, raw material and labor power, increases its output by three times compared with other plastic injection molding machines with the same power consumption. Automatic temperature control devices and a speed matching system of the extruder and the molding machine are installed to optimize the temperature of molds and materials, which makes the machine durable and stable.
Plastic cap machines are mainly used to produce plastic caps. It is our latest full-automatic machine for anti-theft plastic bottle lids such as adding lids, sorting, feeding lids, cutting lids, dropping lids and so on. The maximum output of machine is10800pcs/hr.
This machine is equipped with a whole set of hydraulic reciprocating transmission which is characterized by stable transmission in mold lifting, low noise and easy operation. Its output reaches 300 per minute. Its successful development is a significant advancement in the bottle cap manufacture facilities.