P10 RGB LED Display Module , 3 in 1 DIP PCB LED Sign Modules IP65 Waterproof

P10 RGB LED Display Module , 3 in 1 DIP PCB? LED Sign Modules IP65 Waterproof

Advantages:

Module Characteristics:
(1) ?Lamps: self encapsulation with tube, holder and epoxy resin of good quality. High brightness,low attenuation, high reliability, good consistency, strong environmental adaptability.
(2) ?The black stripe mask of module: The black mask makes better color contrast with the display. And it keeps the screen body safe, away from dust, sunshine, collision of lamps.
(3) ?Surface coating on PCB board: makes it moisture-proof, waterproof and anti-corrosion.
(4) ?Multilayer PCB structure design: uniform current distribution, low-power consumption, fast heat dissipation. It extends lifespan of the led display.
(5) ?Protection design: circuit with anti - interference and black screen protection design makes the led display more perfect.
(6) ?High strength reinforced suit: module is strong and the screen will be flatter.
(7) ?Lamps and driver IC on the same board design: It works more reliable than that on different boards.
(8) ?Bottom chute design: chute and holes on the bottom of the module can drain off water, keep module dry and extend the lifespan.

Application:
(1) ?Guiding system apply in stations, ports, airports etc.
(2) ?Information system apply in advertisement, telecommunication, security company, bank, department, restaurant, entertainment, sports stadium etc.
(3) ?Outdoor media advertising apply on highway, building, shopping mall etc.

Technical Parameters:

What’s the characteristics of 3 in 1 encapsulation ?
?
(1) ?Smaller pixel pitch: The smaller pixel pitch is, the better viewing effect viewer will get. Images is clearer, vivider and more exquisite. There is no doubt that small pixel pitch screen is more appealing to rental market.
?
(2) ?No color distortion: excellent color mixing with better consistency. Chips line vertically. Any viewing angle within range H:100°/V:50° without distortion. But the traditional 1R1G1B encapsulation show different colors when viewing from different angle.
?
(3) ?Cost-saving: Less legs and glue, saves material cost and labor cost for processing less legs.
?
(4) ?Full color and bright luster: unique encapsulation, bigger chips, round top cap makes full color and high brightness, low attenuation uses thick glue for sun UV light, hence it protect LED Chips stable lifespan.
?
(5) ?Lower Failure Rate: Less needles and 2/3 Less lamps improve the performance and reliability and reduce failures.
?