Polyurethane XPS EPS Fireproof Insulation Board Thermal Insulating Materials For Home / Commercial

Product

Performance

UV coating　Decorative Insulation

Board

Decoration

Layer

UV coating decorative board

Water-resistant, fire-resistant, anti-pollution, anti-scratch, anti-abrasion, anti-acid , alkali resistance, impact resistance,UV-Resistance and weather resistance

Precious stone pattern, color, and gloss optional designed; Same using life for indoor use and building, the outdoor life is more than 25 years.

Insulation Layer

EPS insulation layer

(Grade B1)

Heat conductivity ≤0.041.? volume-weight :18kg / m3 with the tensile strength:110--120kpa; volume-weight 20kg / m3 with the tensile strength :140kpa.

XPS insulation Layer

(Grade B1)

Heat conductivity ≤0.030. Volume-weight 25--45kg / m3 & tensile ≥150kpa. Strong compressive resistance.?? 30-40 years average using life. Excenllent structure load-bearing performance .

Polyurethane insulation board

(Grade B1)

Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the? density of? 35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to? half of the EPS, is the lowest heat conductivity of all the insulation materials .

TPS insulation board

(Grade B1)

Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa

Rock wool? (Grade A)

Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees.
Moisture absorption: 3.9%. Organic content: 2.9%.
Rockwool board basic parameters:
Material: rockwool
Apparent density: Rockwool 120 (kg / m3)
Heat conductivity: 0.04 (W / (m.K))
Max operating temperature: 80 (℃)
Specifications: 950,1150 (mm )
Operation standard: GB
Operating temperature: 80 (℃)

Phenolic Foam Board(Grade B Grade A)

Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is? no distortion, no burning ,no fire, being placed 10 minutes at 1400 ℃, can effectively prevent the flames and smoke spread

Item

Detection?standard?and?requirements

The?third?party?test?
results

?
Weather?resistance

JF149-2003,
JGG144-2004

After?weather?resistance?test,
No?damage?such?as?facing?layer?
blistering?or?falling?off,Protective
?layer?hollowing?or?falling?off;?No?
seepage?crack?appear.

No?damage?such?as?
facing?layer?blistering
or?falling?off,Protective
?layer?hollowing?or?
falling?off;?No?seepage?
crack?

JG149-2003,
JGJ144-2004

Impact-resistance?strength?
grade:10

Water?absorption?
g/㎡,Immersed?
24H

JG149-2003,
JGJ144-2004

≤500

21

Wind?pressure
?resistance?value???
KPa

JG149-2003,
JGJ144-2004

Not?less?than?the?wind?load?
design?value?of?the?project

After?15?kpa?level?wind?
load?esistance?test,,no?
water?seepage

Freezing?and?
thawing?resistance

JG149-2003,
JGJ144-2004