Laser Cutting Air Purifier / Smoke Absorber / Dust Collector for Waste Wire Ends or IC Pin Ends

Industrial Fume Extractor / Cutting Extractor with Pliers for Collect Wire Ends or IC Pin Ends

Specifications:

Description:

1. Waterun developed the new products Cuttings Absorber is used absorbing cuttings of parts, so as to avoid cuttings falling on PCB plate and affecting product quality and 5S. It is specially designed for cuttings and shearings recovering in the electronic industry.it efficiently preventing hurt to workers or damage to equipment.

2. Internal parts of machine adopt high-filtering ratio F8 filtering elements.

3. Air connecting joint is copper pipe.

4. Upper over and equipment body use seal ring.

5. Equipment body and upper cover uses # 45 steel plate with spray painting treatment.

6. Adopt special silicone tube (High-temperature resisting and not easily wrinkles-ocurring)

7. Casters installed under the bottom are convenient for movement.

8. Microcomputer chip control, intelligent digital display and equipped with the remote control.

9.When the filter gets saturated and clogged, the machine have alarm system for remind you to replace the filter.

10.More cutting pliers for selection

Features:

1. Each device can be equipped with 4-6 pipelines, each 2-m in length, with 4-6 cutting pliers.

2. Air-taking diameter isφ75mm *2

3. Adopt integration structure design with convenient installation, flexible movement, and no pipeline laid.

4. Upper cover can be separately opened, convenient for pouring out parts bits and pieces, easy for maintenance.

5. Good tightness is kept between the upper cover and machine body without leakage.

6. The machine is equipped with ESD grounding connection and main power switch.

7. Built-in DC brushless DC (330KW) with long life span, small noise, higher air mass flow.?

8. Internal parts of machine adopt F8 high-filtering ratio filtering element, which is dismountable and convenient for maintenance.

9. Absorbing components parts reach to 99%.

10. Working absorbing force is more than 2500Pa.

11. Air volume is more than 360 m3 per hour.

12. Absorbing power of air volume is adjustable. ???????????????

Applications:

1.Waterun Cuttings Absorber is used for cutting and shearing working station behind furnace,?automatically absorbing cuttings of parts, so as to avoid cuttings falling on PCB plate and affecting product quality and 5S.

2. Waterun Cuttings Absorber is specially designed for cuttings and shearings recovering in the electronic industry. While shearing electronic parts, cutting leftover bits and pieces fly and bump with some force, which may fall into products or equipment, causing short circuit of products or damage workers’ eyes. This condition may cause harm to products and workers.

Competitive Advantage:

Compared with the products from foreign countries, our products in terms of the effect is almost the same, but the majority of our products are less than USD2000, so our products are cost-effective, and the use of more affordable cost. The products from abroad mainly purify the viruses and bacteria as the main direction of governance. In China not only to purify viruses, bacteria, but also clean harmful smoke pollution. WHO estimates that there are over 200 million people deaths each year due to inhalation of indoor and outdoor air pollution in small particles.

Our company uses a brushless motor, compare with the ordinary motor, this motor speed is higher, lower noise, it does not require maintenance, but longer product life span. Self-developed impeller, better quality than ordinary plastic impeller, more stable, more powerful suction. The unique tiered filter design, can effectively purify the toxic and harmful substances in the air, such as formaldehyde, benzene, ammonia, radon gas, sulfur dioxide..etc, and use of low cost.