Copper bush and DOP seal Internal Mixer Machine / banbury rubber mixer

1. Introduction of Product

Copper bush and DOP seal 100L Drop Door Type Internal Mixer Machine For Artificial Leather?

2. Description:

? ? ? 1 Mixing volume of mixing cabinet???????? ………100L…

2 Main motor power: 220KW, 8P, AC, Siemens brand

3 Rear rotor speed: 42 rpm

4 Ratio of front and rear rotor speed: 1:1.15

5 Discharge type: downward

6 Colling type: water

7 rotor shaft: biserial self-aligning roller shaft

8 Electrical control: controlled by PLC, brand of Mitsubishi.

9 the decelerator with hard-facing gear makes it\'s transmission steady, least noisy and everlasting.

10 Rotor: edges and corners are wearable, welded by welding rod

11 discharge door can be openned when poweroff

12 Contactor: LG brand

13 Equipped with the banbury mixer: hydraulic station,libritorium,DOP oiling device,Electric control cabinet,operating console

3. Equipment list

1? main body ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1 group

2? press hammer and cylinder????????????? ????1 group?

3? material feeding device ? ? ? ? ? ? ? ? ? ? ? ?1 group???

4? discharge device ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1 group

5? transmission device ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?1 group?????????

6? electric control device ? ? ? ? ? ? ? ? ? ? ? ? ? 1 group????

7? oil pressure and lubricate device??????????1 group???

8? tubing ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1 group

4. Applications:?

1.??? PVC Artificial?Leather;

2.??? PVC film

3.??? PVC plastic floor

4.??? PVC plastic sheet

5.??? Plastic mixer

6.??? Rubber mixer

5. Main Technical Parameter:

6. Competitive Advantage:

1. PLC control system ?
2. Lower?noise,safer?mixer?
3. Excellent dispersing effect

4. Best mixing chamber to get 100% mixing effect.

5. Fast mixing, good effectivity

6. Easier?Maintenance.

7. Long life.

8. No leakage.

7. Service:

1. Oversea installation guide.

2. Oversea test running

3. Oversea worker training

4. Technical support

5. supply of spare parts

6. Technical operation support

7. Formula and processing support

8. Option

The intermediate of the kneading-room is mainly made of alloy steel. Its surface is hard-plated with chromium, beautiful and wear-resisting. In the middle of the alloy steel rotor is a hole which can cool or heat the rotor by oil or vapour(oil heating or vap