3.5"1080P HDMI Network Media Player-M31B

Video Output :

* HDMI 1.3

* Component (Y/Pb/Pr)

* Composite

Audio Output :

* Stereo

* SPDIF Digital audio output

* connector for DTS decode board has inside

Networking :

  Ethernet interface, 10-baseT/100-baseT

 Support USB WIFI,configue should be 802.11N

USB :

* USB 2.0 host 2 port

* USB 2.0 slave

* Device Classifications : Mass storage device

ESATA ports

*ESATA HOST*1

*ESATA SLAVE*1,rate is 3.0Gb/s

HDD Type:

* SATA I/II  HDD

FORMAT:

* EXT3

* NTFS/FAT32

Power on/off control by RC

* Add one MCU,then it can realize power on/off by RC

Power :

* adapter AC100~240 V,DC12V/2A &5V/3A

Human Interface Device :

* Handheld remote (standard)

* USB keyboard (optional)

Connectivity Protocol(s) Support :

Protocols :

* UPnP AV NMPR v2.1

* UPnP 1.0 (connect to myiHome Lite)

* Bonjour

Media Codecs :

Video :

* 4 standard definition streams (PAL and NTSC formats) in any of the following

format: H.264, VC-1,MPEG-4 and MPEG-2,MKV,M2TS,TS,AVI

* One high definition stream 1920 x 1080i(60), 1920 x 1080p (30), 1280 x720p

(60) and one standard definition stream simultaneously

* H.264 MP/HP @L4.1

* VC-1/WMV9 MP@HL, AP@L3

* MPEG-4 ASP @L5 1

* MPEG-2 MP@HL and MP@ML

Audio :

* MPEG 1/2 Audio Layers I, II, and III (MP3)

* Dolby Digital(R) (AC-3)

* DTS

* PCM

* MPEG-2/4 AAC LC and HE

* Microsoft WMA and WMA Pro

* Supports the audio sampling rates at 8, 16, 22.05, 24, 32, 44.1, 48, and 96KHz

* Audio samples at 16, 20, 24, and 32 bits per channel

* FLAC (software decode)

Note: Additional formats available in future firmware releases

Photo formats :

* JPEG (software decode)

* Animated GIF89a, BMP and PNG in browser mode