Pulveriser machine

Uses
MF Series disc-type milling machine is the sea to absorb Germany advanced technology developed by flying a series of milling machines for soft PVC, HDPE, LDPE, LLDPE, PP, ABS, EVA, PP-R, film, nylon, rubber ... ...
The plastic factory professional practice operated to demonstrate, milling in the processing of recycled materials by adding 20% -30% of its products, the physical and chemical properties of new materials to keep the index unchanged, so the plastic products factory down the savings to solve the optimal waste recycling defective equipment.

Features
1, compared with the same type of milling machine, with power in the case of high yield 100% -200%, reduce energy consumption;
2, with the fan discharge, increased dust collection devices, effectively reduce dust pollution, clean and tidy work environment;
3, off the fan discharge, vibration screening materials, failure expected to automatically back to the mill operations, without manual operation;
4, the use of feng shui double cold, good lower body temperature, to ensure uninterrupted milling operations;
5, user-friendly cabinet design, Open the door, repair replacement tool, adjust the cutter convenient and safe space.

-

Technical parameters
Major components cutter (imported from Japan), bearing (Sweden import), swivel (Germany)
Conventional models MF500, MF600, MF800
Host power 37KW-55KW (50HP-75HP)
Suction fan 3KW-11KW (4HP-15HP)
Off the wind machine 0.75KW-1.5KW (1HP-2HP)
Vibration motor 0.75KW-2.2KW (1HP-3HP)
Fineness 5 mesh -80 mesh
Yield 100KG/H-400KG/H

1