AC12V 110V 230V dimmable e27 gu10 led spotlight par36

Hot selling led light par36!!!

ANPU Lighitng PAR36 5-Watt and 7.5-Watt is equal to Philips 36-Watt PAR36 Landscape Lighting light bulb is ideal for accenting

and highlighting your landscaping and outdoor decor. They provide a crisp, bright halogen white light and should only be used in

12-Volt fixtures. Philips Specialty Incandescent and halogen bulbs provide the perfect light for accent and display lighting as well as

general lighting in a variety of applications. .

? Brightness: 5W 450 lumens/7.5W 600 lumens

? Estimated yearly energy cost is 1/7 of Philps 36W PAR36.

? Life: 5 years (based on 3 hrs/day)

? Light Appearance: 3000K (warm white)

? Energy Used: 5 Watts / 7.5Watts

? Lumens per Watt: 90Lm

? Par36 Landscape light bulb is ideal for accenting your landscaping and outdoor decor

? For use in 12V fixtures only

? Multi-Purpose base, PAR36 shape

1. Applied Scope: This instruction has specified the performance of product and the way of testing so as to

be a base for technical performance and installation.

2. General Features:

2.1 Products applied scope: indoor use, such as in home, hall and lobby; outdoor use, such as in square,

construction site, wharf and so on (products used outdoor should coordinate with shell which degree of

protection is up to IP65).

2.2 Usage mode: electric terminals,

operating voltage: □AC 230V 50-60HZ □AC 110V 60HZ ■AC/DC 12V

3. Structure: The product includes aluminium tube suite, current source power supply, several high

brightness LED lamps, holder. Several high brightness LED lamps and power supply are soldered separately

on circuit board and then nested into the aluminium tube suite.

4. Installation and Operation

4.1 This product is applied to AC/DC power supply, working environment temperature is -25℃～45℃.

4.2 Make sure the LED light is intact without damage when it’s installed.

(5). Power on after check and confirm no mistake. Light up the light and it can work normally.

5. Attention:

5.1 Before installation, check the light to confirm whether it’s all right. Genergalling speaking, on the

premise of Packing Sound the best using time is within 3 months. Use up as soon as possible after open the

LED packing bag.

5.2 Before installation, the tube should be kept cool, dry, clean and mustn’t be put in water or fire. Storage

temperature should be controled at 25±5℃ and 40-70% relative humidity.

5.3 Don’t clean the tube with unknown chemical liquid, or it would damage the surface of the tube, even

lead to rift of PC cover. If necessary, clean it with alcohol at ordinary temperature within 30s.

5.4 Product which shell or PC cover with damage is defective goods and mustn’t be used.