Servo Motor Driving Bubble/PE Foam Bag Machine

Ⅰ.  Main specification

1.  Electrical control system

Servocontrol motor, microprocessor controller, LCD display, adjusting parameter by

touching screen, auto temperature controller.

  2.  Triangle forming rack   2 sets.                           

3.  Output material is controlled by 0.75kw Inverter.

4.  Main transmission system, whose speed is adjusted by 0.75kw Inverter.                                       

5.  Heat seal equipment  1set;

6.  Cooling system  1set;

7.  Perch brake system  1set;

8.  After setting heat seal timing parameter, it can apply to PE foam sheet making bag within 1mm,  

    no need to add equipment.

9.  Special design structure of rear feeder, Running stably.                                      

 10.  Electro-static remover   1set.                                     

Ⅱ.  Technical data

 Bag making width : 30~950mm

     Bag making length: 70~1000mm

 Bag making speed: 20~130 bags/min (if two line making, efficiency double)

 Tolerance:0.5mm

 Total power: 6.5kw

 Consumption power: 2.8~4.8kw

   Electricity: AC 380V(three phases) /220V(single phase), 50Hz-60Hz

   Machine dimension: L : 5m , W : 2.8m, H : 1.6m.

 Weight: 960kg

Ⅲ.  Spare parts

 Tools 1 set , Thermal panel 2 sheets, Spring 1 bag, tank 1 pcs, pump 1 set, English operating

Ⅰ.  Main specification

1.  Electrical control system

Servocontrol motor, microprocessor controller, LCD display, adjusting parameter by

touching screen, auto temperature controller.

  2.  Triangle forming rack   2 sets.                           

3.  Output material is controlled by 0.75kw Inverter.

4.  Main transmission system, whose speed is adjusted by 0.75kw Inverter.                                       

5.  Heat seal equipment  1set;

6.  Cooling system  1set;

7.  Perch brake system  1set;

8.  After setting heat seal timing parameter, it can apply to PE foam sheet making bag within 1mm,  

    no need to add equipment.

9.  Special design structure of rear feeder, Running stably.                                      

 10.  Electro-static remover   1set.                                     

Ⅱ.  Technical data

 Bag making width : 30~950mm

     Bag making length: 70~1000mm

 Bag making speed: 20~130 bags/min (if two line making, efficiency double)

 Tolerance:0.5mm

 Total power: 6.5kw

 Consumption power: 2.8~4.8kw

   Electricity: AC 380V(three phases) /220V(single phase), 50Hz-60Hz

   Machine dimension: L : 5m , W : 2.8m, H : 1.6m.

 Weight: 960kg

Ⅲ.  Spare parts

 Tools 1 set , Thermal panel 2 sheets, Spring 1 bag, tank 1 pcs, pump 1 set, English operating