Projective Capacitive Touch Screen , COF Chip on FPC Multi Touch Screen Panel

?Projective Capacitive Touch Screen , COF Chip on FPC Multi Touch Screen Panel
?
?
Touch Panel?Specification:
?

?
?
Main?Structure:
?
■?GG?structure
GG?structure?is?cover?glass?plus?sensor?glass?technology?solution, with high transmittance, good effect of protecting scratch and also harder than PG structure.
?
■?OGS?structure
OGS?is?one?glass?solution,?directly?form?ITO?conducting?film?in?the?protective?glass?and?use?the?sensor?technology.?It?has?the?advantage?of?the?simple?structure,?light,?thin?and?good?transmitting?etc.
?
■?PG?structure
PG?structure?uses?one?PET?film?plus?sensor?glass?solution.?Mature?process?technology?greatly?reduces?the?failure?rate?and?cost.?It?has?the?same?level?weight?with?OGS?structure.
?
?
Main?Material:
?
IC:?from?Taiwan,?America?etc.
Film:?from?Japan,?Korea?etc.?
Glass:?from?Japan,?America,?Germany?etc.
?
?
Application:
?

?
?
Environment?Condition:
?

?
?
Mechanical?Characteristics:
?

?
?
Electric?Characteristics:
?

?
?
Reliability?Condition:
?

?
?
Assembly?Precautions:
?
1,?Do?not?exert?extra?force?to?touch?panel.
2,?Since?touch?panel?is?transparent?and?clear,?make?sure?to?wear?fingerstall?or?glove?before?touching.?
? ? Be?careful?of?your?hands?and?other?parts?from?injury?at?handling?by?glass?corners.
3,?When?handling,?make?sure?to?hold?the?touch?panel?borders?not?center?parts?to?avoid?dirt?to?touch?
? ? panel.?Do?not?lift?touch?panel?by?tail?to?avoid?tail?loosen.
4,?When?installing?and?assembling,?do?not?lift?tail?with?heavy?force?to?avoid?tail?peeling?off?touch?panel.
5,?Do?not?stick?or?mount?other?parts?on?the?tail,?such?as?additional?film?or?metal?plate.?As?it?will?exert?
? ? extra?force?to?tail?tip?and?cause?tail?loosen.
6,?Please?don\'t?pull?FPC?with?force?from?side?to?side,?because?the?FPC?tension?will?make?FPC?burst.
7,?If?there?is?air?groove?on?touch?panel,?when?design?product?structure,?make?sure?no?liquid?and?powder?
? ? near?the?air?groove.
8,?In?order?to?avoid?heavy?stress?to?touch?panel?surface,?make?sure?to?keep?0.2mm-0.5mm assembling
? ??gap?between?touch?panel?and?case.
?

?