Magnetic wire paper taping machine

This machine is used to lap insulation paper over combined magnetic wire conductors. Its taping machines first lap separate single wire and then laps them together into combined conductor. It can produce from 2 up to 6 flat wire conductors with different components. It uses patented tangential taping heads with the tension system which ensures the constant tension over insulation in production from full pad to end pad. This machine enjoys high reputation and is used by many of major magnetic wire producer around world for its high speed and efficiency, safety and reliability.
The exact line configuration will be based on required number of wires, taping layers and reel sizes.
It can be single wire taping or multi-wire taping.

Line Buildup
1) Pay-off stands;
2) Main machine;
3) Take-up stand;
4) Control system

Specifications
1) Wire specification: copper/aluminum flat wire
Width: 5~20mm
Thickness: 1~16mm
Section area: 10~200mm2
Width/thickness ratio:0.4~12
2) Paper specification:
Thickness: 0.040~0.125mm
Width: 10~30mm
3) Taping head
Taping pitch: 8~30mm, stepless adjustable
Taping pitch tolerance: ±0.4mm
Taping tension: mechanically automatic adjusting, constant tension
Rated rotating speed: 800rpm
Working speed: 600rpm
Paper disc diameter: OD 330mm, ID 75mm
Numbers of paper disc on each taping head: 3 or 4 pcs
Paper breaking sensor: phototube detecting breaks, automatic stop
4) Caterpillar towing device: thicker synchronized gear type belt, ensuring even line speed
5) Full enclosing cover: avoiding dust taped into wire
6) Take-up: moment motor drive, constant-tension taking-up, slick rod wiring, take-up disk motorized elevating.