Double sided Metal Core PCB Printed Circuit Board Manufacturers for Heater / Elevator

?
Double sided Metal Core PCB Printed Circuit Board Manufacturers for Heater / Elevator

?
Double Layers Metal Core PCB
?
Double layers MCPCB is consisting of two layers of copper conductor, put them on same side of metal core (usually aluminum, copper or iron alloy). The metal base is on the bottom of whole MCPCB, which is different from double sided MCPCB(the two copper layers were put on the each side of metal core respectively), and you can only populate SMD on top side.
Different with Single layer MCPCB, 2 layers MCPCB requires an additional pressing step to laminate the imaged thermal conductive laminate and metal core (also known as metal base) together.
Compared with normal FR4, this sturcture need more technology and experience on laminating of two layers together with metal core.
The processing steps of the MCPCB with the metal base embedded in the PCB are comparatively complex as hole plugging is required after primary drilling on the metal base in order to isolate it from the circuitry.
?
Double Sided Metal Core PCB
?
It also has same two layers of copper conductor like Double layers MCPCB, but the metal core is in the middle of two conductor, so there\'re conductors (trace) on both sides of metal core, and were connected to each other by Vias. So we named it \"Double sided MCPCB\", and you can populated SMD on both top and bottom.
Different with Single layer MCPCB, double sided MCPCB also requires an additional pressing step to laminate the imaged thermal conductive laminate and metal core (also known as metal base) together. But sometimes, some raw Metal Clad material vendor will supply board material which already laminated.
Compared with normal FR4, this sturcture need more technology and experience on laminating of two layers together with metal core.
?
Multi Layers Metal Core PCB
?
Just like FR4 PCB, we can also make boards with more than 2 layers of traces and we named it \"Multi Layers MCPCB\". The structure is similar with FR4 Multi Layers, but it much more complex to make.
You can populated more components on the boards, put signal and ground layer into seperated layers, to achieve better performance in electrical performance.
Compared with normal FR4, this sturcture need more technology and experience on laminating of more than two layers together with metal core and the cost is much higher than 2 layers MCPCBor double sided MCPCB.
?
Application of MCPCB
?
LED lights:High-current LED, Spotlight, high-current PCB
?
Industrial power equipment:High-power transistors, transistor arrays, push-pull or totem pole output circuit (to tem pole), solid-state relay, pulse motor driver, the engine Computing amplifiers (Operational amplifier for serro-motor), pole-changing device (Inverter)
Cars:firing implement, power regulator, exchange converters, power controllers, variable optical system
Power:voltage regulator series, switching regulator, DC-DC converters
OA:Printer driver, large electronic display substrate, thermal print head
Audio:input - output amplifier, balanced amplifier, pre-shield amplifier, audio amplifier, power amplifier
Others:Semiconductor thermal insulation board, IC arrays, resistor arrays, Ics carrier chip, heat sink, solar cell substrates, semiconductor refrigeration device
?
Advantages
1. PCB factory directly
2. Comprehensive quality control system
3. Competitive price
4. Quick turn delivery time from 48hours.
5. Certificates (ISO/UL E354810/RoHS)
6. 9 years experience in exporting service
7. No MOQ/MOV.
8. High quality. Strict through the AOI(Automated Optical Inspection), QA/QC, flying porbe ,Etesting, etc
?
material
?
our Aluminium base material :bergquist(usa),Polytronics(Taiwan),totking(china),etc. thermal conductivity?range?from?1W/m.K?to?8?W/m.K?Withstand?Voltage?range?is?2KV to 8KV which?can?help?us?to?meet?any?need?of?our?clients,also?reduce?purchasing?cost.?
?
Capability
?
layers:1-4layers
Base material: Aluminum/Copper/Iron Alloy
Thermal Conductivity (dielectrial layer): 0.8, 1.5, 2.0, 3.0 W/m.K.
Withstand voltage:2000-8000V
Board Thickness: 0.5mm~3.0mm(0.02\"~0.12\")
Copper thickness: 0.5 OZ, 1.0 OZ, 2.0 OZ, 3.0 OZ, up to 6 OZ
Outline: Routing, punching, V-Cut
Soldermask: White/Black/Blue/Green/Red ,Taiyo PSR4000 white
Legend/Silkscreen Color: Black/White
Surface finishing: Immersion Gold, HASL, OSP
Max Panel size: 600*1200mm(23.62\"*47.24\")
Packing: Vacuum/Plastic bag
Samples L/T: 4~6 Days
?