Adjustable Semi-diameter Arced Formwork , steel formwork construction for Colombo lotus tower

Adjustable Semi-diameter Arced Formwork ,? steel formwork construction for Colombo lotus tower

Descrition:

Colombo lotus tower is located in the western city of Colombo in Sri Lanka. The?total construction area is 26726 m2, the?total height is 354.8 m, divided into three parts, the tower base (one underground with 4.5 meters height and three layers on the ground with 5 meters height), tower body (mainly structural support member, without functional rooms)?and tower building (functional rooms) .The project is the comprehensive building including broadcasts, television, satellite, catering entertainment, shopping, display exhibitions, conferences, banquets, sightseeing.

Specifications:

Auto-climbing Formwork, Adjustable Arced Formwork, Steel Formwork are applied in this project. The detail is below:

It?can?be?used?for?any?curved?wall?with?the?semi-diameter?longer?than?1.10m?

Adjustable?acted?Formwork?Profile?
Adjustable?Semi-diameter?Arced?Formwork?On?the?basis?of?the?foreign?company?technology,?we?developed?the?

Adjustable?Semi-diameter?Arced?Formwork,?which?can?be?used?for?any?curved?wall?with?the?semi-diameter

?longer?than?1.10m.?Traditionally,?the?formwork?is?produced?in?accordance?with?the?designed?semi-diameter,?

which?is?one-off?use,?causing?much?material?wasting.?All?the?defects?of?the?traditional?formworks?are?overcome?

after?we?developed?the?Adjustable?semi-diameter?arced?formwork.?Also,?we?lease?the?formwork?out?to?the?

contractors?to?save?their?cost,?which?proves?good?effect.?
Adjustable?acted?Formwork\'s?panel?is?18mm?Plywood,because?the?panel?specification?is?2440×1220?mm,so?the

formwork?max?width?is?2440mmUpright?rib?is?combination?steel?frame?,the?panel?and?the?steel?frame?is?

connected?by?bolt?;?

Horizontal?rib?is?short?Double-side?V-iron?,?there?are?adjustable?connectors?between?V-iron.Upright?side-rit?is?angle?

steel?.?

The?radius?can?be?regulated?at?any?time?when?meet?to?different?section.????Adjustable?Acted?Formwork?Technique

parameter:?
Allowed?Load50-70KN/M2???Per?square?meter65KG?
?
Advantage?of?the?product?
Can?be?adjusted?to?any?curved?wall?with?a?semi-diameter?longer?than?1.1m?
Easy?and?quick?operation.?
Low?cost?and?wide?use.?
High?standard?elements.?
?Assembly?procedure
1.?Assemble?timber?beam?and?timber?connector.
2.?Assemble?plywood?and?edge?rib.
3.?Assemble?adjustable?system.
4.?Assemble?connecting?waling.
5.?Adjust?the?formwork,?make?the?formwork?bent?into?designed?radius.
6.?Connect?every?module?by?adjustable?steel?clamp.