- Sunny Steel PipeFitting Industires
-
Shanghai, China
- Main products: pipe fitting, ASTM A335 alloy pipe, Bi-metal clad pipe, Ceramic lined pipe, Elbow fittings
Home > Products > New product > Socket Weld Flanges
Socket Weld Flanges
Negotiable
/ Piece
1 Piece(Min. Order)
- T/T L/C D/P D/A
- 7 days
You May Like
Product Description
Note:
Flange dimensions to ANSI B16.5.
Dimensions "B" & "D" includes raised face thickness.
Bore (SCH) "C" purchasess to Specity.
Larger outlet sizes are avilable on applications.
ANSI 150# / 300# 2mm Raised Face.
ANSI 600# / 2500# 7mm Raised Face.
Socket Weld Flanges
-
Socket welding flange, a popular type of pipe flange, was initially developed for use on small-sized high- pressure piping. The fabrication of this type of flange is similar to that of a slip-on flange. However, the internal pocket of a socket weld flange allows for a smooth bore and better fluid flow. When provided with an internal weld, the static strength of this flange is equal to slip-on flange, but the fatigue strength is 50% greater than double welding slip-on flanges. Smooth bore conditions in such a flange can easily be attained without having to bevel the flange face and, after welding, to re-face the socket weld flange as would be required with slip-on flanges. For this reason, the internally welded flange is popular in chemical process piping.
- The counter bore is sightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same I.D. of matching pipe. The flow is not restricted in any direction.
- Socket welding flanges work well for smaller sizes and higher pressure temperature conditions.
- They are similar to slip-on flanges, but must specify the schedule of the pipe where they will be used for with socket welds.
- Standard facing:
-
Raised face, ring - type, flat face, male - female, tongue - groove.welded both inside and out to provide sufficient strength and prevent leakage.They are ideal for low pressure applications.
- They are ideal for small diameter applications.
- They are used for high pressure applications.
- Socket weld flanges have an internal recess on the inside diameter which allow for a smoot flow of the process fluid.
- They create a smooth bore with the proper welding and grinding.
- Standard facing:
- They are similar to slip-on flanges, but must specify the schedule of the pipe where they will be used for with socket welds.
- Standard facing:
Contact Us
- Sunny Steel PipeFitting Industires
- Contact nameSam Xu Chat Now
- Phone86-21-33780199
- AddressNo. 273, Siping Road, Shanghai, 200081, China
Product Categories
| Composite pipe | New product | Pipe fittings | pipe flange |
| pipe valve | Special alloys | steel pipe | Alloy steel pipe |
New Products
-
Abrasion Resistant Ceramic Lined Pipe
-
Ceramic Lined Elbows and Bends
-
Bi Metal Clad Pipe, Bend
-
Honed Tubes for Hydraulic, Pneumatic Cylinder
-
Carbon Steel Pipes
-
Hot-rolled Seamless Carbon Steel Pipes
Popular Searches
- pipe fitting
- compressed air pipe
- socket fusion
- socket fusion welding
- copper fitting
- red copper pipe
- brass fitting
- fire hose coupling
- sanitary fitting
- plumbing
- expansion joint flange epdm
- ferrule
- pex al pex pipe
- expansion joint
- fire coupling
- gas fireplace part
- stove accessory
- hdpe fitting
- hourglass aluminum ferrule
- copper pipe fitting
- cast pipe
- cast iron tube
- astm a888
- ductile iron fitting
- en877
- cast iron fitting
- union
- ductile cast iron pipe
- elbow
- tee
Recommended Products
- Carbon Steel Welded Seamless Elbows/seamed Elbows
- Overlay Elbow/butt Weld Elbow/shrimp Waist Elbow
- Welded Stainless Steel/alloy Steel/carbon Steel Bend
- 3pe Anti-corrosion Elbow / Buried Epoxy Coal Asphalt Pipe Fittings / Tee
- Stainless Steel Elbow / Interior and Exterior Polishing /304 / Sanitary Grade / Welded / Seamless / Stamping Elbow / Pipe Fittings / Φ51 Price
- Carbon Steel/stainless Steel/straight Seam/seamless Bend
- Carbon Steel/stainless Steel/alloy Steel/anti-corrosion Welding Tee
- Welded Seamless Butt Weld Elbows
- Anchor Brand UPVC Japanese Standard Industrial Drainage 92° Tee
- Anchor Brand UPVC Japanese Standard Industrial Drainage 90° Elbow With Top Outlet
- Anchor Brand UPVC Japanese Standard Industrial Drainage 90° Elbow With Side Outlet
- Anchor Brand UPVC Japanese Standard Industrial Drainage 45° Y-branch
Find Similar Products By Category
- Construction & Decoration > Pipe Fittings > Tee
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Sunny Steel PipeFitting Industires
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Sam Xu
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile