High efficiency small screw air compressor PLC controlled 1.0mpa 10 bar 145psi

High efficiency air-cooling power-driven stationary ?screw air compressor kaishan brand LG-2.2/10 ? 2.23 ?10 bar 15kw

We?may?provide?all?kinds?of?invert?screw?air?compressor,the?power?from?5.5kw?to?280kw,the?air?delivery?from?0.6m3/min?to?72m3/min,the?working?pressure?from?0.5mpa?to?1.3mpa,and?with?water?cooling?,air?cooling,belt?drive?or?direct?connecting.

1. Quick?Detail:

1.?Model:??LG-2.2/10

2. Air?delivery:??2.2m3/min?/?77cfm

3. Working?pressure:1.0mpa/10bar/145psi

4. Connector:G1

5.?Dimention:?1060*800*1230mm

6. weight:550kg

2.screw?air?compressor?main?spare?parts?configuration:

Remarkable Air end:Germany original-builing GHH-RAND air end adopts the third-generator dissymmetrical gear shape.The main rotor is five gears and the vice rotor is six gears.As the differences between them is small,the loss of circumfluence is small which increases the cubage efficiency by close to 20% and save the electric currency by about 25% comapared to normal screw air compressor.The rotor is dissymmetrical shape ,supported by ball bearing and rod bead bearing and operating at a low speed so it can lower the mairtanance cost and provide the air end with a longer service life

Gas Intake valve:Controlledby computer ,the stable and dependable air inlet control valve can make the air displacement and power consumption of the motor chang along with the air consumption,so as to save energy and electrity ,and reduce the operating cost

Oil and air separator:Screw shaped design of oil and gas separator is easy to uninstall and change. Separator core can separate the left oil in the process of compressing air. After separating ,the left oil will be about 1-2 ppm. this will increase the cleanness of the compressed air and lower the pollution to the compressed air and lower the pollution to the compressed air and equipment?

Cooling system:The designed super large cool area ensures it working normally at high temperature and hot environment. Good heat transfer performance, little flow resistance and low request for water quality. It is convenient to clean and need no special cleaning fluid.

Motor:Famous brand motor with F class isolation and IP54 protecting class. It uses imported SKF durable bearing and can be operated all day long
Temperature Controller Valve:Designed specially for the high environment temperature and high air humidity, upon cold start up, thermal valve enables the system to reach the best working temperature as soon as possible, and maintains constant temperature and viscosity of lubricant to prevent condensing of evaporated gas and emulsification of the lubricant, which prolongs the service life of the lubricant, rotor of the main machine,bearing and other parts

3.