Total Cross - Section And Micro Bubble Flotation Cell Chemical Industry

Total Cross - Section And Micro Bubble Flotation Cell Chemical Industry
?
?
Total Cross-Section and Micro Bubble Floatation Cell
?
Quick Detail:
?
1. Total cross-section wet process liquid phase wear-resisting rubber one-way valve
2. Total cross-section air injection device has been notably enhanced, and the energy conservation effect can be more than 85%
3. Tuned mass damper
?
?
Description:
?
Total cross section wet process liquid phase wear-resisting rubber one-way valve
Total cross-section air injection device has been notably enhanced, and the energy conservation effect can be more than 85%
Tuned mass damper prolongs the flotation process, which improves the flotation effect more than 5%
Gas-reagent-mixer enriches the bubbles, which improves the calaiming ability and saves the reagents more than 20%.
Without mechanical mixing devices, the wear-resisting and antiseptic cost is low.
Physic liquor is fed after atomizing, larger superficial area and higher reagent utilization rate.
Microbubble air, larger superficial area and higher air utilization rate.
?
?
Applications:
?
It is widely used for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to coarse separation, swept separation, fine separation and flotation, so the useful ore are reclaimed.
?
?
Principle:
?
One or more gas chambers are installed in the bottom of the tub, on the cover of the gas chamber are full of one-way valves. When the one-way valves are open, the pressed air will be fed into the flotation cell.
?
?
Specifications :
?