BMW OPS

OPS
INTRODUCTION
OPS is mainly used for diagnosis and programming BMW vehicles after E65 series.OPS unit with DIS software is used for diagnosis,which is carried out via OBD-II socket.OPS unit with SSS software is used for programming,which is carried out via OBD-II socket and MOST socket.

FEATURES
1.it can work with all vehicles after BMW E60,as original do.
2.The OPS (Optical and Programming System) can be used especially to program vehicles from E65 as it allows, in addition to vehicle access via the OBD II interface, access to the MOST bus. 3.There is no difference in the programming times when using the OPPS or OPS as the vehicle interface.
4.The optical programming system (OPS) for programming vehicles is handled in exactly the same way as the OPPS.
5.The connection to the workshop network is effected via network cable to a free network connection.
6.Like the OPPS, the OPS does not have an air interface, as the high bandwidth required for programming can currently only be achieved by means of a cable connection


STANDARD CONFIG:
1.OPS multiplexer
2.OBD-II diagnostic cable
3.LAN cable
4.MOST cable


Skype:      cindy52136