Sell Extension Demountable

Place of Origin	China

Model No.:
Product Origin:
Brand Name:
Price Terms:
Payment Terms:
Certification:
Description:JP2 screw fitting is specially designed for brass copper, with a connector developed to connect with brass copper. It is made of high quality brass rod, after being cold cut and hot forging processed. As a high-pressure resistant and corrosion resistant fitting, it has attractive outer appearance and no sand explosions. This kind of fitting can be tightly connected with the brass pipe, preventing gas and fluid leakage and little affected during movement. With tightened screw, the pipe and fitting can be easily and closely connected, getting rid of the worry about gas or fluid leakage. No special tool but a spanner is needed to tighten the screw. JP2 fittings are also easy to be dismounted and be used for next time. JP2 screw fittings are the first and most popular ones being used to connect with brass pipes. The specifications of brass pipes that are connected with the JP2 fittings are 15, 22, and 28; and the specifications of threads are G1/2", G3/4", and G1". Equal coupler: both of its ends shall be connected with brass pipes of the same size. A JP2-15×15coupler should be connected with #15 brass pipes on both ends. Reducing coupler: two ends of the fitting are connected with pipes of different sizes. A JP2-22×15 coupler should be connected with a #15 brass pipe on one end and a #22 brass pipe on the other end. Straight tube with outside: one end is connected with a brass pipe, and the other end is with a female thread. A JP2-15x1/2 coupler should be connected with a #15 brass pipe on one end and a 1/2" female thread on the other end. Female coupler: one end is connected with an aluminum plastic composite pipe, and the other end is with a male thread. A JP2-15x1/2F coupler should be connected with a # 15 brass pipe on one end and a 1/2" male thread on the other end.