HIPS , PC , Nylon ( PA ) , POM makerbot 3d printer filament materials

3D Printer POM fliament ?1.75 / 3.0 mm

1, Specifications : 1.75&3.0.

2, Manner and packing: use vacuum package, the net weight 1.0KG.

3, Water absorption small.

4, Have strength, elasticity, resistance to pressure and tensile sex very good.

5, Less friction coefficient, abrasion resistant to distortion, insulation very good.

We also have?PLA?,?ABS,?HIPS,?PC, Nylon(PA),?POM,?PETG,?PVA?,WOOD,?FEXIBLE Filament

1, Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it, use vacuum package, every Tray into? a small box, and the each 8 small box into a master carton.

2, Plastic?tray:?

diameter?160mm,?axle?hole32mm,?overall?height?90mm.the?corresponding?small?carton?17×17×10cm?the?

big?carton35.8×35.8×22.5cm

Diameter?200mm,?axle?hole?56mm,?overall?height?70mm.?the?corresponding?small?carton?21×21×8cm?the?

big?carton?43.5×43.5×18cm

Advantages: Nearly same as Nylon, only the strength is little lower than Nylon,but more cheaper than ? ? ? ? ? ? ? ? ? ? ? ? ? ?Nylon

Disadvantages: Has a?odor like buring the plastic when it is being printed.

Quality?Control?:

1, All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind materia l, and all had achieved the latest REACH certificate.

?2, Before the mass production, our engineer always do the test to make sure that sure that each batch of new raw materials must be printed by 3D printer.

3, The Laser diameter runs automatically to control the diameter of the filament and keeps it in a right??? range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off and never use it.

4, We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a desiccant??? inside of it.

Applicable?models:?Suitable?for?Markerbot,?RepRap,Cubify?and?UP?3D?Printer.