Customized Arm Automatic Remote Control Traffic Barrier Gate of Aluminum Alloy

Traffic Barrier Gate AC220V , AC110V With 50 Meters Remote controller
?
Quick?Detail:
?
Name: Traffic Barrier Gate
Speed:6?seconds

Arm length: Max 6 meter with aluminum alloy

Rating voltage: AC 220/110V±10%, 50/60HZ

Colors: Orange, yellow, blue, red, customized

?
?
Model Selection and Differences

?
Functions & Features
?

1)In case of power off, Turn the hand wheel and raise the boom manually.By the time the power is supplied, Lock the clutch delvice to make it working normally again.
2)Crank connecting rod movement structure, and stability
3)Three control buttons: for boom raising,falling and pausing
4)Boom backtrack function: the boom will rise if it hits something when falling

5) Double safety limit switches (photocell electrical limit switch/motor memory sensor)
6) Auto-closing
7) Support the INFRARER PHTOCELL for anti-bumping function (optional)

?
Specifications

?
?
With WONSUN, your job gets easier.
?
Because we don’t just create “good” products, that work pretty well.Our thinking is beyond the short-term.We are conceiving, designing and creating high-tech solutions that are as advanced and effective as they are reliable and long-lasting.
Because we want to provide tools and services that truly are innovative,that will improve your performance and enhance your skills;and that will make your business easier, increasing its profitability.
Because our focus is on Quality with a capital Q.We just won’t settle for less.
?
?
Communication with customers
?

A: 220V( 110V) power terminal:
Take off the output terminal cover and plug in the power wire.
B: The traffic light (R&G light) connection:
The traffic light connector is for 220V power. Connect the Red Light Wire to R output terninal, the Green Light Wire to G output terminal. And the COM terminal is the loop input terninal for the traffic light circuit.
C: Infrared emitter and receiver:
To use this device, first connect the infrared device to power output terminal, and then connect the receiver to thr infrared signal input terminal.
D: Loop detector terminal:
This controller can support both the internal and the external loop detector connections.
However, just one way can be chosen.
If external loop detector is selected, just connect the loop detector to 220V power, and connect the signal wire to the signal input terninal.
If the internal loop detedtor is selected, connect the internal loop detector to the socket on the circuit board directly and the signal wire to vehicles detector signal input terminal.