Natural Color Leapfrog 3D Printer Wood Filament 1.75mm , 3D Printing Plastic Filament

Flythinking wood filament 3d printing 1.75mm/3.0 wood natural ilament

Specifications:

1. Flythinking wood filament 3d printing 1.75mm/3.0 wood natural filament
2.?No bubbles?
3. Good quality, competitve price?
4. RoHs

Suitable for Makerbot, RepRap, Cubify, Mendel, Huxley UP, Thing-o-matic, Leapfrog,?
Solidoole, Ultimaker and any other FDM 3D printer.

Flythinking wood filament 3d printing 1.75mm/3.0 wood natural ilament

Description:

ABS Filament and PLA Filament is commonly used in 3D printing, has the following characteristics:

?
(1) High strength, high stiffness, good toughness; ?

(2) Density is small, when printing larger volume model lighter, save money;

?
(3) Cost-effective, can be processed in wide range temperature;

(4) 1 kg /plastic spool packaging, can be automatic feed;

(5) To be applied to a variety of 3D printer, Makerbot, RepRap, Cubify, Mendel, Huxley UP, Thing-o-matic, Leapfrog, Solidoole, Ultimaker series etc. ?

(6) No Bubble

(7) No block nozzle, good stick hot bed

(8) Low shrinkage, thermoforming dimensional stability

Production Control?:

1. Produce process?

I . Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours).

II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.

III. Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.8-3.0mm,

roundness 0.05mm, each spool net weight 1kg0.02kg.

IV we put all filament spool in shelf, different kind in different shelf, all categories arranged orderly.

2. About waste & recycle?

Much time you will find some black filament is too brittle, that added and mixed with some recycle and

scrap after produced.

We haven\'t produced with scrap outlet, rework&recycle material, or dispose, but for quality assurance

purpose.

3. packaging?

We put each filament /spool on seal PE bag with desiccant , then smaller carton, then out big box

We also have vacuum heated bag to replace of PE bag, make better avoid moisture.

4. Productiong quality control

I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than

accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range

at acceptable.

II. keep each record