Customized SUS 304 2 Inch Sock Pot Bag Filter For Water Treatment

? ? ? ? ? ? ? ? ? ? ?
Low Cost Less Pressure Loss 2 Inch Sock Pot Filter Bag Type With SUS 304 Material? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??

Specifications

1, Standard:GB, American Standard, German standard, Japanese standard, customized; single bag, parallel bag, multi-bag, cartridge;
2, Models: S, T series, PBF polypropylene containers etc.,?
3 Rated flow: 6,10,23,51,,, 1088 tons / hour
4 Rated working pressure: 10, 20,, kg / cm2
5 Cylinder Material: 304 stainless steel (inside and outside blast or polished) or customized materials;?
6 High-strength support basket: by uniform pore size of high-strength stainless steel mesh manufacture of 3.5mm;?
7 Inlet and outlet: 1-14 or customized;?
8 Inlet and outlet Location: Side into and side out, side into and bottom out,top into and bottom out, top into and side out or customized.
9 Interface Type: flange, screw thread or customized.
10 Bag model: and non-calibration;?
11 Filtration precision: 1-800um (microns) relative or absolute precision;?
12 Seal ring material categories: general nitrile rubber, Teflon, nylon, Te Fulong acid such as high temperature and high-performance specialty materials;?
13 Type of bag: pure polypropylene, polyester, wool, viscose fiber, aromatic polyamide, Teflon, nylon and other materials;?
14 Structure of bag: single screen (surface filtration structure, pore size of 100 to 800 microns), needle felt cloth (three-dimensional structure of fluffy deep filter, pore size of 1 to 200 microns) and melt blown nonwovens (deep bed filtration structure, pore size of 1 to 100 microns) three, and there are a variety of ~ 800 micron filtration precision to choose from, in order to meet the requirements of different production processes. Acid, high temperature and other characteristics of the bag material can be adapted to different filtered liquid chemical compatibility requirements.

?The practical dimension could be customized?

?FAQ:
?
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this bag filter?
Stainless steel (SS304/SS316)?
03. What is the working pressure for it?
04. What is the filtration degree?
10 micron or 200 micron?