Low cost Cheap Flow Meter with Clamp-on Transducer

The TDS-100F wall-mount fixed  ultrasonic flow meters are  carefully designed so that their operation is simple and easy. The unique clamp-on fixture design makes the installation very simpleand no special skills or tools are required. 

Due to the nonintrusive nature of the technology, there is no pressure drop, no moving parts, no leaks, no risk of contamination, no risk of corrosion, no pressure dependency.

ultrasonic flow meter

Technical data: 

Repeatability

Better than 1%

Accuracy

Better than ±1%for velocity above 0.6ft/s

Velocity

0.5s

Display

LCD with backlight    2*20leters

Units

English(U.S) or metric

Signal Outputs

Current output: 4-20mA or 0-20mA. Impedance 0-1k. Accuracy 0.1%

Signal Inputs

5 channel analog signal inputs

Recording

Automatically record the following information: The totalizer data of the last 

64days/64month/64years;The time and corresponding flow rate of the last 

64 times of power on and off events.

Allow manual or automatic flow loss compensation;the instrument working 

status of the last 64days

Communication 

Interface

RS-232,RS-485(optional);                                                                                                            

GPRS/GSM module for networking, remote monitoring and remote control

(for model UFM-100FNB only)

Enclosure

Protection Class: IP65(NEMA 4X);                                                                                                      

Explosive Proof Class: ExdⅡBT4(for model UFM-100F2B only)

Liquid Types

Virtually all commonly used liquids(full pipe)

Pipe Size

1"~240"(DN30~DN6000mm)

Pipe Material

All metals, most plastics, fiber glass, etc. Allow pipe liner

Cable

Shielded transducer cable. Standard length 15'(5m). Can be extended

 to 1640'(500m). 

Power

AC: 110V/220V or DC: 8VDC-36VDC