Falling Rock protective mesh slope reinforcement plastic coated wire mesh

Falling Rock protective mesh slope reinforcement plastic coated wire mesh

Specifications

1. wire diameter:3mm or 4mm
2. high tensile strength 1770Mpa
3. mesh size:103mm x 180mm
4. Mesh shape: diamond
5. Material: high tensile steel wire mesh

1) tecco Mesh?Specification:

Mesh?shape: diamond

Material: high?tensible?carbon?steel

Wire?strength:1770Mpa

Wire?diameter:3mm?

Corrosion?protection: super?coating?

Coating:150g/m2

Mesh?opening:103mm?x?180mm?

Breaking?load?of?single?wire:12.5KN

Tensile?strength:110KN/m

2) TECCO?mesh?standard?roll:

Mesh?edges?knotted

Roll?width:1-3.5m

Roll?length:10m?or?30m

Weight:1.45kg/m2

3) Feature:

1. anti-corrosion

2. Easy?to?install?

3. Don\'t?need?maintenance

4) TECCO?mesh:

Components

The?TECCO?system?consists?of?four?main?components?that?are?carefully?coordinated?with?each?other:

1). TECCO?steel?wire?mesh

TECCO?mesh?is?made?of?high-tensile?steel?wire?with?an?ultimate?tensile?strength?of??1770?N/mm2.

2). TECCO?spike?plates

Rigid?spike?plates?that?are?reinforced?with?ribbing?ensure?optimal?load?transmission?from?soil?or?rock?anchors?

to?the?TECCO?mesh.

These?plates?are?placed?over?the?anchor?heads?and?tightened?to?pre-tension?the?mesh?onto?the?slope.

The?plates?are?galvanized?and?have?dimensions?of?13.0\'\'*7.5\"*0.4\"(330mm*190mm*10mm).

3). TECCO?connection?clips

The?connection?clips?high-strength?steel?wire?connection?clips?enable?mesh?sections?to?be?joined?without?

overlapping?and?still?guarantee?one?hundred?percent?transfer?of?forces.

These?claw?are?hot?dip?galvanized?and?consist?of?0.25\"(6mm)?thick?steel?spiral.

4). Soil?or?rock?nails

Adapted?to?the?local?soil?and?rock?static?requirements,?the?TECCO?mesh?can?be?anchored?in?accordance?with

?our?dimensioning?concept?with?commercial?soil?or?rock?nails.

The?main?anchors?of?the?system?are?installed?in?a?grid?typically?from?6.6?to?13.1?ft?(2.0?to?4.0m)horizontal?and

?vertical?spacing.Actual?spacing?depends?upon?the?results?of?site?analysis?and?modeling.Anchor?consist?of?

commercially?available?steel?bars?ranging?from?1.0?to?1.25?ft?(25?to?32mm).

Selfdrilling?grout?injection?anchors?are?also?permitted.Additional?anchors?may?also?be?used?to?provide?added?

support?at?boundaries?and?in?low?points?and?hollows.?