Surface Set Diamond Drilling Tools , Diamond Impregnated Bit For Harder Rock

Surface Set Diamond Drilling Tools , Diamond Impregnated Bit For Harder Rock

Specifications:

Diamond surface bit
1.export experience,leading manufacture
2.best price high quality
3.good feedback
4.ISO9001 certificate

Natural diamond surface set bits

Differ from impregnated bits in that?Surface-Set Diamond Bits only have a single layer of diamonds set onto the working surface of bits according to a pre-determined pattern, Its waterways are usually shallower than an impregnated bit because of the single layer of diamonds. Some bits are designed with face Discharge holes to minimize core wash when drilling sin soft and fractured formations.

We supply a wide range of surface set bits, which includes a variety of profiles, diamond grades and sizes
designed to provide the most efficient cutting ability in all different rock formations.
Some other types of bits such as pilot type, special discharge type or concave type non-coring special purpose bits?are available on request.
?

Rule of thumb: The harder the rock it, the smaller the diamonds we should use.

Number of Stones is a very important factor in determining how well a big will cut. Our engineers use mathematical formulae to set each diamond on bit cutting area to ensure proper overlap with a minimum of diamonds to keep the carat weight (and initial bit cost) as low as possible in a balanced design.
?

Diamond Grade is the most important factor to take into consideration when selection a bit. As it affects total?meters drilled and therefore affects cost per meter drilled. It obviously also affects bit price. The diamonds we use have been selected carefully and also have been improved over the years.

Feature:

Surface-Set Diamond Bits are set with a singular layer of natural or synthetic diamond utilizing a hard matrix compound on the face of the bit. The diamond set design ensures sufficient overlap to prevent premature wear of the matrix.

Surface-Set diamond bits are primarily recommended for use in drilling relatively soft, abrasive, unconsolidated formations that are not effectively drilled by impregnated diamond bits. They are also recommended for use in drilling harder formations where the available rotational speeds and bit loads are insufficient to use impregnated diamond bits due to drilling equipment limitations.

Size Available:

Q Series: A,B,N,H,P/ATK,BTK,B3,N2,N3,NTT,H3,HTT,P3,PTT
T2 Series: T2 46,T2 56,T2 66,T2 76,T2 86,T2 101
T6 Series: T6 76,T6 86,T6 101,T6 116,T6 131,T6 146, T6S 101
T Series: T36,T46,T56,T66,T76,T86
Z Series: Z46,Z56,Z66,Z76,Z86,Z101,Z116,Z131,Z146
B Series: B36,B46,B56,B66,B76,B86,B101,B116,B131,B146
WF Series: HWF,PWF,SWF,UWF,ZWF
WT Series: RWT,EWT,AWT,BWT,NWT,HWT
WM Series: EWM,AWM,BWM,NWM
WG Series: EWG,AWG,BWG,NWG,HWG
Others:?NMLC,HMLC,LTK48,LTK60,BGM,NGM,ADBG,TBW,TNW,
ATW,BTW,NTW,NXD3,AX,NX,NXC,AXT,T6H,4 9/16,NWD4,412F,SK6L146,
TT46,TB56,TS116,CHD101

All Chinese size