6000 LPH Self Cleaning Disc Stack Centrifuges of Diesel Oil Separator Unit

6000 LPH Self Cleaning Disc Stack Centrifuges of Diesel Oil Separator Unit

Description:

Model PDSD6000- B1317Z separator is mainly used to remove water and mechanical impurities from?diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator?unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.

The model is also used to separate two unsolvable liquids with different specific gravity or remove small?amount of solid particle from liquid. ? ? ? ?

The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption,?convenient operation and economic maintenance cost. ??

The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically?and fully.?

The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run?for long time with low vibration, safety and security.

The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.?
?

1.?The?piston?type?slag?removal?and?self?cleaning?automatically?discharging

2. belt drive(No?second?tensioning?required)

3.?Full?hydraulic?discharge?structure,?quicker?Respond?and?slag?discharge?more?thoroughly

4. Internally installed?with?three?sets?of?programs applied to?the?Separation?of?HFO,?LO?and?DO

5.?Automatically?detection?of?water?sealed?water?and?slag?discharge?time

6.?“No-gravity?ring”?automatically?adjusts?“oil?water?interface”

7.?Suitable?for?the?separation?of?high?viscosity(380cSt/50℃)and?high?density(1010Kg/m3?)?HFO

Principle and structure

Principles?of Operation?:

Model?selection?reference:

Automatic?control?system:

Water Control: Automatic control unlocking water, sealing water and water-seal/water switching.

Pneumatic Control: Filter and adjust compressed air, control three-way changeover pneumatic valve.

Temperature Control: Automatic control the temperature of the oil line, also control separately or with?electric control cabinet at the same time.
Buzzer Control: Monitor oil temperature, pressure, over loading, non-discharging and leaking, and Offer?a group of passive contactor stretching out to control panel.

System Drawing:

The?Whole?Unit?Consists?of:

1.Separator?????? 2.Oil feed pump?????? 3.Electric control box????????? 4.Steam heater
5.Temperature adjusting valve ? ? ? ? ? 6.Steam trap ? ? ? ? ? ? ? ?7.Safety valve ? ? ? 8.Pressure switch
9.Oil filter?????? 10.Pressure gauge???? 11.Vacuum gauge ? ? ? ? ? ? ? ?12.Temperature sensor
13. 2/2 Solenoid valve ? ? ? ? ? ?14. 2/3 Solenoid valve ? ? ? ? ? ? ? ? ? ?15. Air reduction pressure valve
16. Pneumatic three-way valve??????? 17. Stop-check valve ? ? ? ? ? ? ?18. Brass filter ball valve
19. Water pressure reducing valve???????????? 20. Ball va