Glass Bottle Beer Filling Machine 3 in 1 Rinsing Filling Capping Machine

Glass Bottle Beer Filling Machine 3 in 1 Rinsing Filling Capping Machine
?
?
Quick Details

Technical Data:
?

Characteristics

The series of equipment combines the rinsing, filling, sealing functions on the same machine. The design of the machine is scientific and reasonable .The appearance is beautiful and the function is complete. Its operation and maintenance is convenient.? And its automation is high. The whole machine is controlled by PLC with touch-screen as the interface between human and machine .The amount of the drinks in the drink tank can be controlled automatically. The filling and capping will be stopped automatically when there is no bottle .When bottles are cramped wrongly or when caps are not available, the machine can be stopped automatically.

Working principle

Bottle rinsing part

This part is made up of lifting device, the main transmission device, the fixed frame, clamp device, distributor, and open clamp cams and over turn cams etc.

Lifting device is used to adjust the height of the rotary tables and clamps of machine to adapt to the bottle height. Its power comes from the lifting lever. Lever rotates drive screw rotation to realize the rotary tables lift.

When the clamp rotate to star wheel with rotating table, bottle into the middle of clamp, open clamp cam close the clip claw and clip the bottleneck with the rotating clamp. When rotary tables to rotate, clamp pieces will rotate with over turn cam, guide cams rotates around over turn cam and flip the bottleneck to 180 degree till the bottle mouth is top downwards and directly face the spray nozzle, then the clean water in the spray nozzle sprays and wash the inside of the bottle, Drain, turn 180 degree downwards and then goes out from the star wheel.??????????????????????????????

Filling part

Beer filling machine is specially designed according to the beer feature, and the filling part is designed to be twice pre-evacuation.

The filling part is made up of main liquid pipe, rotating cylinder bearing base, filling cylinder fulcrum loop, wine or carbonated drink tank, filling valve, filling cylinder pipe, control loop device, ascending device, the distributor, height adjusting control, stimulating bubble arm, vacuum system, etc.

a. The first Vacuumize

Open the Vacuum valve stem, in the bottle and vacuum channels forming a road. The air in the bottle will be discharged from bottle through this channel, in the bottle will form a vacuum. After reach the fixed time, Vacuum valve closed, then it will be finished.

b. Gas injection

Open the filling valve, a pathway is formed between the bottle and the gas channel. The gas filling into the bottle through this channel till gas pressure in wine tank equals to the beer tank pressure.

c. The second vacuumizing

After gas injection into the bottles, little air will be concentrated on the top of the bottle neck. By the second vacuumizing, this part of resting air