Professional High Performance 2 Valve Manifold Valve Manifolds of High Pressure , 1/8"-2" Size

2 - valve manifold valve manifolds with high pressure used of Industrial

Quick Detail:

1. Prime,High Quality
2. Standards:NPT,BSP,ISO,DIN
4. Certificates:ISO9001:2008, CE

5. Brand Name: TF

6. Place of Origin: China (Mainland)

Description:

2 - valve manifold valves manifold with high pressure used of Industrial

Two Valve Manifolds are the most commonly used manifolds. They may be provided with test ports on the process sides and drain ports on the instrument side for drawing of the process and instrument lines respectively.

TF?series?instrument?manifolds?are?used?for?static&hydraulic?pressure?based?on?the?transmitter?for?pressure,

differential?pressure,flow?rate,?liquid?level?and?etc?at?home?or?abroad.3-valve?&5-valve?manifolds?are?designed?for?

differential?pressure.there?are?many?kinds?of?structure?types?and?end?connections?for?model?selection.All?the

?instrument?manifolds?have?been?widely?used?in?engineer?projects?of?oil?refining,?chemical?industry,?electrics,?

coal-to-hydroxide,?metallurgy,?nuclear?power?and?so?on.

Controlled?by?a?group?of?needle?valves?made?of?stainless?steel.The?function?of?each?valve(pressure-shutting?off,pressure?drainage?or?pressure?balancing?)?is?determined?by?its?definite?position?on?the?manifolds.All?

these?functions?by?its?definite?position?on?the?manifolds.All?these?functions?are?undertaken?by?two?kinds?of?needle?

valves;needle?valves?with?big?bonnet?are?used?for?manifolds?with?nominal?diameter?of?0.156in(4.0mm),and?needle

?valves?with?small?bonnet?are?used?for?the?manifolds?with?nominal?diameter?of?0.125in(3.2mm).

Characteristics

1. Press up to 6000psig (414bar) for standard stainless steel body
2. Temperature for PTFE packing from -65°F to 450°F (-54°C to 232°C)
Temperature for Grafoil packing from -65°F to 1200°F (-54°C to 649°C)
3. Packing below stem thread isolates the thread lubricant from the media
4. Back seating design protects the packing in fully open position
5. Non-rotating stem tip
6. 100% factory tested
7. Orifice:0.157\" (4.0mm),CV:0.35

Applications:

Two?Valve Manifolds are the most commonly used manifolds. They may be provided with test ports on the process sides and drain ports on the instrument side for drawing of the process and instrument lines respectively.

Specifications:

Competitive Advantage:

? ?? ?The stem threads rolled to reduce friction
?? ?
? ?? ?Stem threads are coated with silver teflon mixture to allow for smooth operation.
?? ?
? ?? ?The stem plug has swivelling design and uniquely hardened to provide for wear and long life.
?? ?
? ?? ?The pipe sealing system to prevent blowout of the stem and reduce gland leakage.
?? ?