Pump Ceramic Shaft and Bushing

Pump ceramic shaft and bushing

Material: 99% alumina ceramic/ silicon carbide(sic) ceramic
Size:OD3*80mm, Custom made by your drawing.
Custom made is available.

Best Quality with lower price.

Diamterfrom 0.65mm to 100mm

Length from 2mm to1000mm.

Custommade is available, If you need any further information, please do not hesitateto contact us .or you can visit our website.

The price depends on your quantity and drawing.

The pump ceramic shaft and bushing is one of our mainly products.Our normal ceramic shaft diameter from 1mm to 15mm, the max diameter can reached 100mm.the normal length within 100mm. but we also can provide 1000mm length ceramicrods.

high strength pump ceramic rods with high wear resistance, itsworking life almost 10 times than cemented carbide. so this advanced ceramicmaterial has a lot of advantage.

Pump ceramic shaft and bushing Application:
Process industry
Oil and gas industry
Refining technology
Petrochemical industry
Chemical industry
Power plant technology
Pulp and paper industry
Hot water applications
Light hydrocarbons
Boiler feed pumps
Industrial pump

We have great variety in this design to suit any applications, such as the oil pump, industry pump,Pulp and paper industry, water and waste water technology etc.

These mechanical seals are having single spring design to take care contaminated liquids. Due to open coil spring, it is used for non-clogging and self-cleaning operations.

Seamark can supply many kinds of ceramic parts according to the customer’s different requirements. Our products include ceramic plunger, ceramic rod, ceramic shaft, ceramic piston, ceramic tube, ceramic pipe sleeve, ceramic seal ring, special shape ceramic etc.

If you need any further information, please do not hesitate to contact us.

Suzhou Seamark Fine Ceramics Co., Ltd

Mr Beck Jin

Email:info@smkceramic.com

Tel: +86 512 66255075

Fax: +86 512 66255030

Mob: +86 18550512237