MBR Membrane with 0.1um Pore Size, 40,000 ppm Chlorine Resistance and 506mm Width

Capacity: 140L/m2/hr at 0.1 MPa, 15°C It combines membrane separation with tradition biochemical reaction and greatly increases the biochemical efficiency, achieved by prolonging the HRT (hydraulic retention time) and SRT (sludge retention time) Small footprint and low operation cost There is no need for secondary sedimentation pond, so the construction will be more compact Chemical consumption will be greatly decreased compared with traditional methods The membrane silk is made of PP (polypropylene) With our unique technology, the fiber is modified and enhanced to have high strength and high toughness, so that it can work under a variety of bad conditions Outer and inner diameter of the membrane silk are 500 and 400um It is so thin that suspended solids in the water can quickly plug the cross section even when the silk is broken The filtration mode is out to in, and because of this filtration mode, the pore on the surface of membrane silk can shrink during filtering, so it can have a higher filtering precision And the pore will expand during backwashing, so it can wash away some big particles to clean the membrane at the most Our enhanced modified PP material has great fouling resistant ability, and it can recover its performance by backwash instead of chemical cleaning It can reduce the damage to the membrane silk and save the cost on chemicals Technical parameters: Material: PP hollow fiber Membrane area: 10m2/piece MWCO: 50,000 to 100,000 Dalton Pore ??size: 0.1um Treatment capacity (for domestic sewage): 1.0m3/d/piece Air flow rate: 1.0m3/h/piece Maximum content SS: 13g/L Chlorine resistance: 40,000ppm Operating cycle: Filtration: 8 minutes Relax: 2 minutes Length: 1,000mm Width: 506mm Brand-name Parts Experienced Staff Green Product International Approvals Packaging Price Product Features Product Performance Prompt Delivery Quality Approvals Reputation Service Small Orders Accepted