SBM Low Price Easy Handling Efficient Hammer Crusher

SBMLow Price Easy Handling Efficient Hammer Crusher

HammerCrusher Product Introduction

Hammer Crusheris used for grinding the medium-hard andlow-abrasive materials with their pressure resistance strength blow 100Mpa, and humidity lower than 18%. And these materials includethe coal, salt, plaster, tile, limestone and so on.

HammerCrusher Working Principle

The main working part of hammer crusher is rotorswith hammer. The rotors consist of main shaft, disk, pin shaft and hammers.

1. The motor drives the rotors to rotate quickly inthe crushing cavity. Raw materials enter the crusher through the feed openingand are crushed to small sizes by the high-speed hammer, with the process ofpressing, impacting, cutting and grinding.

2. There is a screening plate under the rotor, whichmake sure the materials with size smaller than the screen mesh will be screenedout and others will be left to be further hammered and ground until theyfulfill the standard size.

3. The size of the final products can be adjusted bychanging the screening plate. The gap between the rotors and the screeningplate can also be adjusted according to different requirements.

HammerCrusher Structure Features

1. High production and high crushing ratio.

2. Low power consumption, homogeneous particle size.

3. Simple, compact and light mechanical structure.

4. Low investment cost, easy management.

5. CE&ISO