0.75 - 550KW AC Synchronous Motor Frequency Inverter With 3 Phase / Single Phase

Brand Name	HNC Automation		Place of Origin	China
Model Number	HS510

Delivery Time:3-14 days on payment
Certification:CE, 3C

Sensorless Synchronous Motor Motor Frequency Inverter With 3 / Single Phase

PMSM (Synchronous motor) sensor-less drive, no need encoder or any feedback component Control Mode: torque / speed / position, or mixed control mode, e.g. In ceramic industry, torque & speed mixed control mode is popular. Built-in serial communication interface, Mod-bus or Can-bus communication protocol AC 3 phase 0.75~550KW, single phase 0.4~2.2KW Various accessories for different applications, For the applications that need synchronous motor without encoder, e.g. ceramic industry, petroleum machine

Description:

HS510 series inverter is specialized for synchronous motor drive without encoder or other feedback components. It is based on advanced sensor-less permanent magnet synchronous motor control technology. With leading drive performance and functions in the industry, HS510 adopts unique current vector control algorithm, which can efficiently drive synchronous motor to achieve high-accuracy, high-torque and other high-performance control.

Solution description

1. HS510 solution for synchronous motor open-loop system includes high-torque & low speed & low power permanent magnet synchronous motor + HS510 synchronous motor drive.

2. Control Mode: torque / speed / position, or mixed control mode, e.g. In ceramic industry, torque & speed mixed control mode is popular.

3. Adopt 32 bit DSP from TI to ensure high performance vector control

4. Built-in PID function, for work under speed mode or torque mode with high precision

5. Complete communication, support standard RS485 and Can-bus

6. Various protection function: over-load, over-current, over-heat, phase-lack, etc.

Applications:

HS510 synchronous motor could be used in most applications without encoder.e.g., ceramic industry, petroleum machine, electronic machines, etc.

Applications on petroleum machine

We provide permanent magnet synchronous open-loop position solution (simple reciprocating motion) based on HS510 products. The solution adopts travel switch as position limits as well as position-reset switch (to eliminate the position accumulative error).

The advantage of this solution is as below:

Start smoothly, no impact; High dynamic response feature, low noise / harmonic High position control precision No feedback, to adapt the hard environment

Applications of ceramic industry

The old solution adopts asynchronous motor as well as inverter as control system. The new solution use HS510 + synchronous motor to replace the old one.

The advantage of the new solution:

No reducer, down the total cost, Higher efficiency thanks to the synchronous motor Higher positioning & speed precision High response feature thanks to the high performance of HS510 Much lower error rate because of the good quality of HS510

Specifications:

Item	Specifications
Basic function	Control system	High performance of current vector control technology to realize asynchronous motor and synchronous motor control
Drive performance	High efficiency driving for induction motor and synchronous motor
Maximum frequency	Vector control:0~300Hz????? V/Fcontrol:0~3200Hz
Carrier frequency	0.5k~16kHz; the carrier frequency will be automatically adjusted according to the load characteristics
Input frequency resolution	Digital setting: 0.01Hz Analog setting: maximum frequency ×0.025%
Control mode	Open loop vector control(SVC) Closed loop vector control(FVC) V/F control
Startup torque	Type G:0.5Hz/150%(SVC)；0Hz/180%(FVC)? Type P:0.5Hz/100%
Speed range	1:100(SVC)	1:1000(FVC)