Electromechanical Condensate Recovery System , Screw And Flange With Bulit-in Trap

Electromechanical Condensate Recovery System , Screw And Flange With Bulit-in Trap

Quick Details:

Model:HPT30 with bulit-in trap

Structure:Condensate Recovery System

Max.?Flow Rate:7t/h

trap dimensions:

Screw: L=580 H=620 W=430

Flange: L=650? H=720? W=430

Piping dimensions: condensate inlet Φ 80? outlet:Φ 50? Motive medium inlet and exhaust port:Φ 25

Maximum Working Pressure:1.05 MPaG

Max Operation Temperature:170 Centigrade

Motive medium pressure: 0.03-1.05MpaG

Motive medium: steam, compressed air,nitrogen or other non-flammable, on-toxic gas

Pumped medium: steam condensate, water or other non-flammable, no-toxic fluid with a specific gravity of 0.85-1.0

Filling head: standard:630? Min:459,550mm

steam or air consumption: per t/h condensate:1.7kg steam, 6m3 compressed air

Weight:141kg

Specifications

Power Trap
Improve production efficiency, save energy, reduce water treatment cost
No electricity
Easy Installation or Repair
?

Features:

1. Discharging and recovering condensate can improve production efficiency, save energy, reduce water treatment cost, and fully utilize steam.
2. Eliminates water hammer, avoids equipment damage, and improves the reliability and safety.
3. Effectively recovers condensate, reduces the cost of boiler fuel and water treatment for reuse, and that of down stream water treatment and drainage.
4. Recovers condensate with temperature of up to 185~3 without evaporation.
5. No need for electricity, reliable operation, and easy for installation and maintenance.