High power Wood Floor Sander / Polisher floor cleaning equipment 254mm

High power Wood Floor Sander / Polisher floor cleaning equipment 254mm

Quick Detail:

Description:

> Power: 275 W

> Volt: 110/220 V, 50/60 HZ

> Working Width: 254 mm (10”)

> Working Speed: 300 RPM

> Gross Weight: 12.5 KG

> Standard accessories: 1 piece each of #40, #60, #80, #120 Sanding Paper & Polishing Pad

> Easy operation, no experience needed.

> Engineered for quiet and smooth operation.

> Lightweight, so it is easy to take anywhere. Because of the larger orbit, you can clean faster with less weight.

> Efficient dust extraction.

> Save time, effort and protect your health.

How to assemble the machine? Or how to use machine?

1. Assembly for Handle:

Turn the Chassis upside-down and gently press the tab on the Screw Box from underneath using a screwdriver. Remove the Screw Box.；

Align the mounting holes in the lower portion of the Handle Tube with the front two mounting holes in the bracket at the rear of the Floor Machine’s Chassis. This is the location that the Handle Screw. Then secure the Handle Tube to the Chassis, using one Handle Screw, two Flat Washers, and one Hex Lock Nut. Replace the Screw Box.

2. Assembly and Remove for Vacuum Hose.

Assembly: Connect the Vacuum Hose (Dia. 40mm) to the Hose Connector. Then put the Hose to the Vacuum Connector.

Remove: Press the Tab on Vacuum Hose on pull it out.

3. Assembly and Replace for Sanding Paper

Assembly: Put the Handle Tube back to vertical position, then lay the machine on its back with the handle lying on the floor. Align the Vacuum hose of Sanding Paper and Tools Holder, then put the Sanding Paper onto the Tools Holder.

Replace: Follow the indication as below to lay the machine on floor, remove the Sanding Paper by hand, and then replace by a new one.

4. The motion of machine

Put the Handle back to vertical position to lock it by the Foot Pedal. Hold tight handle and makes the two wheels drop to the ground, than can push or pull the machine to move.

Applications:?

The only floor machine designed to strip, wax, buff, sand and refinish your hard surface and even dry clean your carpets so you can use them immediately.

Whether you have marble, wood, carpet or other kind of floor, this Floor Machine patent oscillating motion assures you of the easiest operation and maintenance. It’s a “NO” Floor Machine

NO torque, NO brush marks, NO sanding marks, NO swirls, NO gears, NO motor brushes to wear out, NO belts, NO water to soil and mildew carpets and best of all NO experience needed.

Specifications

Why to choose Solar Wash Floor Polisher?

Easy operation, no experience needed.

Engineered for quiet and smooth operation.

Lightweight, so it is easy to take anywhere. Because of the larger orbit, you can clean faster with less weight.

Efficient dust extraction.

Save time, effort and protect your health.

The only floor machine designed to strip, wax, buff, sand and refin