ARM9 FL2416 single board computer/development board/embedded board with 64M DDRII, 256M SLC NANDFLASH

FL2416 is the successor of FL2440. There are more interfaces, more drivers, more functions with more reliable chips and other components. It is almost completely compatible with all that of FL2440’s modules and software functions.

First choice for ARM9 user
Perfect successor of OK2440
Samsung S3C2416 processor based on ARM9 architecture, main frequency: 400 MHz
FET 2416 CPU module integrates all 2416 chip function
8-layer PCB stepped construction, immersion gold process design

More stable and reliable
EMC, temperature, vibration and aging tests make it more stable and reliable
Multiple modules to satisfy your demands

The richest software resources and system compatibility
Support Linux and WinCE
Most testing program source code are open to users

CPU Module Features
 CPU: Samsung S3C2416X processor, ARM926EJ kernel, 65nm CMOS, main frequency up to 400MHz
 RAM: 64M Byte DDRⅡ
 Flash: 256M Byte SLC NandFlash
 Operating Temperature: -10℃ ~ +70℃
 Dimension: 730mm×548mm
 Voltage: 5V
 Storage Temperature: -40℃ ~ +85℃
 Humidity: 10%~95%
 OS Compatibility: WinCE6.0, Linux 3.1.8
 EINT/GPIO:  16x EINT ; GPIO up to 100
 LCD: RGB 24-bit
 EBI BUS: 16x EBI BUS
 Audio: 1x AC97/IIS/PCM(multiplexing)
 IIC: 1x IIC
 SPI: 1x SPI
 UART: 4x UART(three 3-line, one 5-line) or 3x UART( one 3-line, two 5-line)
 USB HOST: 1x USB HOST 1.1
 USB Device: 1x USB Device 2.0
 SD/MMC: 2x SD/MMC
 AD: 10x 12 byte AD, including 4-channel resistive touch interface
 2D/3D: Support 2D graphic acceleration
 PWM: 4x PWM
 RTC: 1x RTC
 Boot: 7 pins
 JTAG: 1x JTAG


Base Board Features
 LCD: RGB 24-bit
 10x A/D
 1x IIC
 1x SPI
  4x UART( three 3-line, one 5-line) or 3x UART(one 3-line, two 5-line)
 USB HOST
 4x USB HOST
 1x USB Device
 2x SD/MMC
 1x 10/100M adaptable Ethernet interface
 1x JTAG
 4x keyboard
 16x EINT
 Support SD card and NAND booting
 Audio: IIS interface
 4x LED
 Temperature Sensor:18B20
 IRDA: HS0038B
 1x reset
 Power switch
 One power supply interface
 1x Buzzer
 Dimension:144mm×105mm
 1x CR1220 button battery to keep the time on when power off

OS Linux
 Cross-compiler: arm-linux-gcc-4.2.2
 Flashing Method    
   1. Flash image file to NandFlash via USB(could be used to flash certain files, easy to debug)
   2. Flash image file to NandFlash via SD card(simple and swift, appropriate for mass production and system-updating in bulk);
   3. Fully upport flashing under Windows XP
 U-boot
   U-Boot-1.3.4
   Nand boot
   Support USB OTG2.0 download
   Support command line flashing of uboot.bin, kernel zImage and file system yaffs2
mmc.bin
   Support SD card offline flashing
   Support flashing Linux via SD card
   Support USB OTG2.0 flashing Uboot, kernel and file system
Linux Kernel
   Version: Linux-3.1.8
   Support file system YAFFS2
   Watchdog driver
   RTC driver
   4x LED driver
   4x user button driver
   PWM control buzzer driver
   ADC driver
   Touch screen controller driver in CPU
   LCD driver ( 4.3", 5.6", 7", 8", 10.4")
   USB Host driver, support U-disk, bluetooth, USB WiFi, USB 3G and other USB devices
   USB mouse and keyboard
   USB camera
   SD card driver
   3G driver
   Support GPS with interface driver
   LCD to VGA driver
   Serial port driver
   USB WiFi driver
   Audio driver (UDA1341)
   Ethernet (DM9000)
   USB to serial port driver
   Infrared receiver driver
   Temperature sensor driver
File System: busybox-1.13.3
Command Line Testing Program
   ADC convert testing procedure
   Keyboard testing program
   LED testing program
   IIC testing program
   SPI testing program
   Watchdog testing program
   PWM control buzzer testing program
Graphic Display
  Resolution: 480*272, 640*480, 800*480, 800*600 pixels
Graphic System
  Qtopia- 2.2.0: classic embedded graphic interface system. Under Linux, it will automatically run. Both screen touch and USB mouse are available with it while the former is the default one.
  Support screen touch and USB mouse
  Qtopia2.2.0 is optional.
Graphic Application Testing Programs
Qtopia2.2.0 is default, including Forlinx application testing programs, whose source codes are open and just for your reference. The  program list is as follows:
  LED test: to test whether LED blinks or not as required
  Buzzer test: to test whether PWM could control buzzer by changing the PWM frequency
  ADC test: to test whether values shown on interface changes with rotating it.
  3G dial-up: support WCDMA, CDMA2000 and TD-SCDMA. After dialling up, we could surf the Internet through browser.
  WiFi: USB WiFi is acceptable. DHCP could be used to allocate IP, gateway and DNS. After connection, Internet surfing is available.
  Picture viewer
  Media player
  Calendar, clock, calculator and IE browser
  File management
  Terminal
  Multiple games