Cortex-A8 OK335xD Single Board Computer 512M RAM 256M NANDFLASH

OK335xD CPU Module Features
 CPU: TI AM335X Cortex-A8 processor,  Max. 1GHz frequency.
 Note: The standard main processor is AM3554 and the frequency is 720MHz/800MHz.
 RAM: 512M DDR3
 FLASH: 256M SLC NandFlash
 Operating Temperature: -40℃~+85℃
 Dimension: 46mm X 70mm
 PMU: TPS65217C
 Voltage: 5V
 Humidity: 10%～90%
 OS compatibility: Linux3.2/Android4.2/WinCE7.0/StarterWare
 GPU: PowerVR SGX530
 1xUSB 2.0 Host Interface,1xUSB 2.0 OTG Interface
 2x Gigabit Ethernet Interface
 3xSD/MMC/SDIO Interface
 3x IIC Interface
 2x SPI
 6 x UART/IrDA Serial Port
 GPIOs: Support
 8x ADC Interface
 2x CAN bus Interface
 EEPROM: Support
 Video Encoder: Software Codec
 2D / 3D: Support
 RGB: Support
 Audio Interface: IIS Interface

OK335xD Base Board Features
1xSPI
Power: 5V Instant Voltage Power Interface
4 x User LED
LCD: 4.3", 5", 7",  8", 10.4" resistive or capacitive LCD
1x 32G SDHC card
WIFI:1x SDIO Interface is available for connection
Serial Port: 3x Serial port (2x RS232, 1 x TTL)
1 x USB Device
4 x USB 2.0 Host
RTC: On-board RTC chip
1 x RS-485 bus interface
JTAG: Support and is used for starterware debugging
8xADC interface, 4 for resistive touch panel and 4 drawn out for user ,
2 x IIC interface
6 functional buttons
Audio: 1x phone interface, 1x MIC interface, and 1x line in interface
Switch: SD card boot or NAND flash boot
1x reset button
1x Gigabit Ethernet interface
1x CAN bus interface
1x PWM interface is used for LCD backlight adjustment
External Bus:12-bit address but and 16-bit data bus

Linux3.2 OS
 Kernel: Linux-3.2.0
 Flashing Method: Flash image file to NandFlash via SD card; Flash image file to NandFlash via USB
 U-boot-2011.09
 Cross-tools-am335x-4.5.3
 Development Environment: Ubuntu12.04
 LCD Display: 4.3",5”, 7”, 8” ,10.4"LCD. Resolution:800*480/800*600
 File System: ubifs
 Graphical System: QT4.8
 NIC driver
 LED driver
 LCD backlight driver
 USB interface U Disc
 USB mouse
 PWM driver
 Flash ECC verification
 Nand Flash driver
 UBI file system
 SD card driver
 LCD Frame Buffer
 Resistor touch screen driver
 RTC driver
 Audio driver(I2S Interface)
 SPI driver
 Serial port(including 3 serial ports)
 Button driver
 Watchdog driver
 RS-485 driver
 CAN driver
 SD card testing
 LCD testing(including resistor touch test)
 Button testing
 USB testing
 Wired LAN testing
 Serial port testing
 Audio testing
 Reset testing
 RS-485 testing
 CAN testing
 SPI testing
 Watchdog testing
 LED testing
 Backlight testing
 RTC testing
 EEPROM testing