24 Ports UTP Cat5e Patch Panel with back bar for 23-28AWG Cables

24 ports cat5e UTP patch panel with back bar fit for 23-28AWG Cables

Quick Detail:

1.Type:Category 5e UTP

2.Color:black ? ? ? ? ? ? ? ? ? ? ??
3.Certificate:ISO 9001:2008

4.Specifications:24 ports?

5.Feature:with rear cable management

6.3 u\" Gold plating on contact area

7.Sample is available

Description:

1. The structure of each port of this patch panel is same which makes sure that the performance of each port is consistent.

2. Cable manager is combined to patch panel. All kinds of cables with different dimensions can be fixed on the patch panel.

3. T568A punching sequence and T568 B punching sequence are both compatible. Fitting for horizontal distribution in the equipments room and equipments connecting.

Electrical:

Angle:90,180 Degree

Current rating: 1.5 Amp Max.
Voltage rating: 150 Volts
Contact resistance: 20 m-ohm
Insulation Resistance: 500M-ohm
Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min

Specifications:

Meet TIA/EIA-568-A and TIA/EIA-568-B Category?6A requirements.

Meet TIA/EIA TSB-40
Meet ISO/IEC Generic Cabling Standard 11801
Meet CENELEC Generic Cabling Standard EN50173

Materials:

Housing: PC UL94V-0

Termination: 110 Type?
IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
PCB: FR4 1.6mm(0.04\") thickness, 2 layers
Contact: PC UL94V-0, 0.45mm(0.018\") Diameter Phosphor bronze with 3 u\" Gold plating on contact area.

Applications:

Patch management subsystem is the most important component is to achieve vertical lines and two horizontal cabling subsystem cross-connect hub.?

for Structure Cabling System