2 Poles Stepping Motor Stator Slot Powder Coating And Recycling Machine

2 Poles stepping motor Stator slot Powder Coating And Recycling Machine

Quick Detail:

?
Design and produce principle

Description:

This Coil Powder Coating Machine is used for stator coil powder coating insulation. The machine has count function.Working hours can be decied by customer.?Machine?working ability?120~180pcs/h

Working process:
(1) Load the coil (1pc) to the sling fitting and insert each wire head(heated) into the connection groove,compact inching cylinder.
(2) Turn on the switch (go up and down, heating, coating etc controlled by time relay to work automatically)
(3) After finish coating (the powder adhere to the stator coil and through melting and leveling ?preliminary, ?there\'s a little powder in the inside and outside of the stator lamination, but not melt, it can??clean completely by preliminary air blowing and subsequent cleaning). Take it down and transmit toanother person, clean the inside and outside of the stator with air blowing gun in the powder cleaning ?entrance,?? then put it on the shelf (prepared by customer) for natural cooling → put into oven together ?for baking (prepared by customer, the bake requirement of the powder in the oven is the oven temperature??rise to the needed temperature for curing powder(this depend on the enameled wire heat- resisting temperature and powder curing requirement), keep hot insulation for over 40 minutes).
?