Plastic Auxiliary Machine , Water Cooling Tower For Injection Molding Machine

Plastic Auxiliary Machine , Water Cooling Tower For Injection Molding Machine

Quick Detail:

Air compressor is a necessary equipment for plastic injection produce, the main purpose is supplying cooling water to cool the water chiller, and if the mold\'s cavity is under 10, also we can use the water tower to cool the mold.

Characteristic of cooling tower
?

1. Round shape backwash cooling tower adopts bottle shape design, the air resistance is the lowest.
2. Cooling body is made of high grade tempered glass. surface adopts mechanical spray painting, it is with equal colorant will not fade in long time.
3. Driving part adopts special motor and fan motor for cooling tower, which is with characteristic of stable running, low power consumption, big air flow and low noise.
4. Water distribution device is composed of nylon distribution device, tempered glass distribution pipes and cast copper core, the water distribution is automatically through recoil of water. water pressure needed is low, pressure head is not easy for damage, water distributionis equal.
5. Pouring stuffing is with characteristic of equal water distribution, nice hydrophilic, low air resistance, endure high temperature etc.
6. Steel components went through advanced zinc plating, and outer is anti-corrosion painting.
7. The bottom plate can be used for catchment plate, it is with automatic water supplement device, manual water supplement device, overflow and drainage device, so it can be used for close circuit cycle pool, no need additional pool.
8. It is with special noise reduction technology, the noise level is much lower than China ruled noise standard level.
9. This tower is with nice stability and strength, can endure 8 grade earthquake and 12 grade typhoon.