1500 barrels/hour 5 Gallon Water Filling Machine For PET / Plastic Bottle

1500 barrels/hour 5 Gallon Water Filling Machine For PET / Plastic Bottle

1.1500 barrels / hour 2 sets and line process:

1)Artificial barrel automatic pull cover 2 sets 2 sets of automatic external Brush
2)Automatic cover light inspection
3)Automatic cleaning the inside of the tunnel on the barrel automatic rotary filling and capping 2
4)Combo 2 steam shrink machine inkjet printer



?

2. Description of major equipment:

1, HYCG-16 rotary machine
HYCG-16-type rotary drum machine is designed for 5 gallons barreled drinking water production of major equipment.
a, whole PLC, frequency conversion automatic control.
b, spring loaded lid system, the buffer system to ensure cover ratio;
c, hydraulic cylinder liquid level control.
d, gland chain inclined shape, and a spring cushion to ensure capping rate.
e, device management cover the bottom with drain holes, wet cap will accumulate water leaked into the motor and damage the motor. Also equipped with photoelectric detection automatic cover, to prevent more or less, to ensure smooth management cover, slide built with optical, lack of cover police.

2, automatic washing tunnel inside
a, washing machine total station is 13:
First: drained, so that small cap poured; second, three: lye (heating, the temperature 45 ℃), lye tank with 304 materials to prevent corrosion and insulation, automatic temperature; fourth said: Lek dry; fifth, six: sterile water return; seventh, eight to: disinfectant; ninth said: drain; tenth, eleven: sterile water (located outside of the barrel jetting) XII, thirteen: drain.
b, outside the red part of a manual control valve, to prevent splashing.
c, flushing pipes with pressure gauge, lye and disinfectant with sampling tube, ensuring lye and disinfectant concentration;
d, each tank with level display.
e, processing tank return port on the outside, with the filter.
f, the barrel can be automatically counted, less than 10 does not operate.
g, the concave bottom of the barrel, outside the spray should take some spray, so each area flush with blowing device to blow off bottom of the barrel effusion, lye and disinfectant to reduce the loss.
h, both sides of the perspective window can be removed for easy repairs.

?

3. Major equipment technical parameters:

An online pulling cap:
a, pull hijab: 4
b, Pressure: 0.6Mpa
c, Gas Consumption: 1 m 3 / min
d, Dimensions: 1350 * 850 * 1800mm
2, automatic rotary brush barrel machine outside
a, Power: 1.5KW
b, Dimensions: 1400 * 1500 * 1800mm
3, automatic bucket device
a, gas pressure: 0.6Mpa
b, Gas Consumption: 0.2 m 3 / min
c, Power: 0.55KW
d, Dimensions: 3200 * 800mm
?

4, automatic cleaning inside the tunnel

a, power: heating 18Kw, rinse 6Kw
b, Gas Consumption: 0.8 m 3 / min
c, pressure:> 0.4Mpa
d, station: 10 * 13
e, Dimensions: Approximately 4800 * 3300 * 2000mm
?

5, the rotary filling machine:

a, filling heads: 16
b, Power: Main motor 4Kw
c, gland: 0.37Kw
d, management cover: 0.18Kw
e, into the pump: 2.2Kw
f, Dimensions: Approximately 2850 * 2550 * 2300mm
?

6, automatic cover machine

a, to enhance the scene to determine the inclination orbit
b, Power: Lifting: 0.37Kw
c, cover positions Dimensions: 1000 * 800 * 800mm

4. Material configuration: