Acid Proof Split Case Horizontal Centrifugal Pump , End Suction 1.5-15KW

Acid Proof Split Case Horizontal Centrifugal Pump , End Suction 1.5-15KW

Sinofine FSB fluorine plastic alloy pump has a simple design. So it is featured on quick installation, low maintenance, and easy repair. Most centrifugal pumps must be gravity fed or utilized with a priming chamber; some are self-priming. You can control the flow rate by restricting the flow at the outlet with a nozzle or valve, and in most cases, you can restrict the outlet indefinitely without damaging the pump.. The structure of FSB centrifugal pump is made up of pump casting, impeller, rear cover, seal,brace, shaft, bearing, coupling, tight bolt, nut and baseplate. For pump casting,there is a separately flange ring which is made of modeled plastic alloys installed in the link part of two sides.The modeled plastic alloys installed in the right side of rear cover modeled plastic alloys installed in the right side of rear cover.Impeller is designed for link shaft method.The metal shaft, which is made of high quality steel alloy and there is plastic alloy modeled on the exterior, fix the impeller and metal shaft into integration and ensure the torque followed the rotating between bottom shaft and impeller. Thus, the wet medium part is plastic alloy.It is high mechanism seal.Take the WB2-type, ST-type which is the adjustable face mechanism seal technology without using the cooling water. Be made of silicon carbide, high purity alumina ceramic, filled PTFE, graphite and other materials.

Sinofine FSB centrifugal pump take the liquid-carrying parts of the FSB and FSB-D series centrifugal pump which they are all made of fluoroplastic alloy. Their structures are compact, operations easy, and prices inexpensive. The pump casings, impellers, and mechanical seals, etc. of the models are interchangeable, and the models are warmly accepted among industries such as pesticide, electronics, and papermaking..Sinofine FSB centrifugal pump works by the conversion of the rotational kinetic energy, typically from an electric motor or turbine, to an increased static fluid pressure. The rotation of the pump impeller imparts kinetic energy to the fluid as it is drawn in from the impeller center and is forced outward through the impeller vanes to the periphery. As the fluid exits the impeller, the fluid kinetic energy is then converted to pressure due to the change in area the fluid experiences in the volute section. Typically the volute shape of the pump casing , or the diffuser vanes (which serve to slow the fluid, converting to kinetic energy in to flow work) are responsible for the energy conversion. The energy conversion results in an increased pressure on the downstream side of the pump, causing flow.

Our products all adopt the computer design and optimization of processing, the company has strong technical force, rich production experience and perfect detection means, so as to ensure the product quality is stable and reliable.

Model Significance:

100FSB-40

100 - The pump’s inlet diameter is 100mm

FS - The material of the liquid carrying part is fluoroplastic alloy

B- ?Single-stage single-suction centrifugal pump

40 - The pump lift is 40mm