Transmission Pole Hardware , Zinc - Iron Embrace Hoop Hold Hoop Fastener

Transmission Pole Hardware , Zinc - Iron Embrace Hoop Hold, Hoop Fastener?

Quick Detail:

1. Single hanging hoop easy installation.

2. High strength

3. Cheap

4. Specifications vary

5. Can be ordered sample

6. Cable hoop outside the galvanized to prevent rust.

Description:

Hold hoop is to use a material or so-called waling another material artifacts. It belongs to the fasteners. Embrace hoop device by coupling board, wing, Rachel reinforcing plate, bolt and inner liner. Hoop has a good variety of, embrace hoop cable, telephone pole embrace hoop, anchor hoop, messenger wire hoop, stainless steel hoop are relatively common. An embedded embrace hoop, it is the right and left halves join after embrace hoop involution, left and right half piece are in semicircle ring, the hoop bending outward on both ends of the half circle, which formed an installation ears, whose character is: the left piece at the end of the hoop as stated in the mounting ears open caulking groove, the corresponding, coupled with the right piece of hoop set corresponding to the installed ear pin, right hoop end pin embedded left patches on the installed ear hoop end installation embedded groove on the ear.

Applications:

Embrace hoop is to use a material or so-called waling another material artifacts. It belongs to the fasteners

Specifications:

1. Product introduction: hoop also called hoop, hose clamps, hold or the loop is made of a material component of another material, it belongs to the fastener. Hoop is a sign post embedded to hold a band, it is two and a half from the left and right to hold a band to join up after, Left, Right, two and a half hoop are Semi circular, each end of the half circle outward bend, forming a mounting ears. Characterized by : the left half hoop open embedded slot on the side of the mounting ears, and accordingly, And the right half hoop the end of the matched set of pins on the ears.On the right end of a hoop ear pins embedded in the left half to hold a band of embedded slot on the side of Mount ears.

2. Product range:? Hoop hoops Board, wings, tie bar plate, bolts and inner liner form.

3. Product category : hoop into the sign posts to hold a band, cable hoop, telephone poles to hold a band, such as cable hoop, supporting wire hoop

4. Product material : Zinc - iron after Professional machines stamping heat treatment

Competitive Advantage:

1) Special material for superior quality and longevity

2) Phosphating surface finish for environmental protection ,rust protection and best price

3) Attractive appearance