Width Adjustable Roll Forming Machine

The width adjustable sheet roll forming machine is designed to produce exactly the same profiles but with different covering widths, which means the raw materials with different widths will be available to be roll formed by this roll forming machine. Generally, there is no cutting device required for the width adjustable sheet roll forming machine, so the raw materials are the finished cut sheets according to required lengths, and before roll forming, there are feeding guide and a rib forming rollers.

Below is One Machine General Parameters for Reference Only.

Structure of the Machine: One side of the machine is adjustable to fit different widths of materials (36" & 48") automatically; between the left and right inside rollers, the auxiliary rubber rollers equipped.

Material Width: 914mm-1220m

Thickness of Coil: 0.3-0.6mm

Forming Stations: 18

Forming Speed: 8-10m/min. inside, 3-5m/min. outside

Material of Shafts: 45# steel

Diameter of Shafts: 50mm

Material of Roller: high quality 45# steel with tempering treatment and surface coated with hard chromium 0.05mm.

Transmission: By 1.0" chain-brackets

Motor Power: 5.5 KW (Siemens Motor)

Motor for Width Adjusting: 1.5KW

Control: Electrical Control Box

WE CAN ALSO MANUFACTURE ACCORDING TO CUSTOMER'S DRAWING AND REQUIREMENT.