Hot-dipped galvanized Steel Automobile Showrooms

Hot-dipped galvanized Steel Automobile Showrooms , PU Sandwich Panel

The exhibition hall in the pictures were designed, constructed and installed by BDSS who are professional and practical in designing, processing and installing. You may give us your own drawings to enable us construct as per your request or you might just give us your ideas, we can design the project based on your ideas. Welcome to contact us for anything you needed.
?

Exhibition hall? included the main structure( steel beam/girder, steel column/pillar), the secondary structure( roof and wall purlin, steel bracing, tie-bar, etc), door and windows, and other accessories.

1. We have our own technical teams, so we can design, fabricate and install this steel structure workshop according to customer’s requirement.

2. We have pretty good preservative treatment on this steel frame as follows,

a. Clean the steel( reach to Sa2.5 Grade, China Code), then we will spray paint: 2 layer epoxy zinc rich primer and 2 layer antirust paint( total thickness: 100-120um); Warranty period: 18-20 years under normal conditions.
?

b. Hot-dipped galvanized, when the thickness of parts is less than 3mm,thickness of hot-dipped gal is more than 45μm; when equal to or more than 3mm, that is more than70μm. Warranty period: 45-50 years under normal conditions.

3. We will pre-assemble all the steel structure before loading, so it’s very easy to install the steel structure workshop in your there according to our installation drawings. Also, we will supply all technical support during installation and after-sale service.

4. You can choose freely the roof and wall panel, included both types:

a. Heat-Insulating material( EPS, Glass wool, Rockwool, PU, etc.)
they have different thickness(50mm,75mm,100mm), density, color, type, etc.
?

b. Single color corrugated steel sheet( Steel Material: Aluminum- Zinc sheet;galvanize steel sheet ect):
They have different thickness( 0.3-0.7mm), color, type, etc.

5. You can choose freely the material of door and windows( Aluminum alloy and PVC)

6. We also have so many accessories, for example, steel bracket, bolts, self-taping screw, rivet, inter and outer cullis, rainspout, trimming sheet, glass cement, etc. you can buy them according to your exact requirement.