1310nm / 1340nm Fiber RF Optical Transceiver

1310nm / 1340nm Fiber Optic Transmitter Receiver, 60KM RF Optical Transceiver

>This machine use Gaas devices as a preamp, into the RF pre-distortion circuit, to improve the system of CTB,CSO,C/N index. The machine equipped with the

Microprocessor software, have real-time condition monitoring transmitter operation, digital display, fault sound and light alarm, network management and other functions.

>The optical receiver guarantee a higher CNR, when to receive a lower optical power was still able to. Along with the cooler to ensure the laser in shell temperature of –20℃～+70℃ degrees still can be maintained at setting temperature.

Features:
-?Independent structure, apply to 1U aluminum rack for centralized management.
-?Support system bandwidth: 45-860MHz
-?Use imported high linearity, low noise of DFB laser, large transmission capacity, nonlinear distortion.
-?RF input automatic gain control (AGC) and manual gain control (MGC) circuit.
-?A comprehensive and reliable automatic optical power control circuit (APC) and laser thermoelectric cooler temperature control circuit (ATC).
- Once the laser’s operating parameters deviate from the permissible range set by the software, it will automatically disconnect the laser power and red light flashes.
-?Support video lossless regenerative relay, so that video transmission up to 100km.
-?Power and fiber-optic link, data status indicators of the LED can monitor system health.
-?Industrial design, modular design allows reliable and flexible equipment.?

Target Industries:

- Remote transmission for Community TV RF signals.

-?Television transmission between city to city, city to village

-?TV signal transmission within the village, large hotels and other program delivery

-?Remote multimedia teaching/ campus monitoring, video conferencing system

-?Long-distance radio and television, high-quality video and audio transmission system.

Optical property
Optic output wavelengh: 1310±30nm single-model
Optic output power: ≥2mW
Optical connector type: FC/APC SC/APC
Reflection loss:(47～550) MHz≥16dB; (550～862) MHz≥14dB

RF Parameter

System bandwidth: 45-860MHz
Band Roughness: ＜±0.75dB
RF input level: 72-88dBuV
Input impedance: 75Ω
Return Loss: ≥ 14dB(550～860)MHz

Link performance

CNR: ≥51dB

CSO: ≥60dB

CTB: ≥65dB

AGC control range: ±8dB

MGC control range: ±8dB

General Parameter

Operating Temperature: -40 ℃～+85 ℃
Storage Temperature: -45 ℃～+95 ℃
Relative humidity: 0～95% (Non-condensing)
Power Voltage: AC85-260v/50Hz
MTBF:≥105 hours
Power consumption:≤30W

Order Information: (Packed in standalone type, suitable for the standard 1U Rack)

Note: The interface can be ST or FC, according to the different requirements from customers.? The distance can be 40km, 60km.

Accessories in the package: