Electrical Interface 850 nm VCSEL 10Gigabit SFP+ Optical transceiver 300m , PIN photo - detector

Electrical Interface 850 nm VCSEL 10Gigabit SFP+ Optical transceiver 300m , PIN photo - detector

10Gbps SFP+ Optical Transceiver, 300m Reach

Features

Optical interface compliant to IEEE 802.3ae 10GBASE-SR

Electrical interface compliant to SFF-8431

Hot Pluggable

850nm VCSEL transmitter, PIN photo-detector

Maximum link length of 300m on 2000MHz/km MMF

Operating case temperature: 0 to 70°C

Low power consumption

All-metal housing for superior EMI performance

Advanced firmware allow customer system encryption information to be stored in transceiver

Cost effective SFP+ solution, enables higher port densities and greater bandwidth

Applications

10GBASE-SR at 10.3125Gbps

10GBASE-SW at 9.953Gbps

Other optical links

Description

This 850 nm VCSEL 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125 μm or 62.5/125 μm multimode optical fiber

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled.

The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.