PVC Twin Pipe Extruder , Plastic Pipe Extrusion Line / Machinery

PVC Twin Pipe Extruder , Plastic Pipe Extrusion Line / Machinery

Quick detail:

?Type: pipe

?Voltage: 380V50HZ

?Pipe diamenter :20-800mm

?Screw design: double screw

?Pipe diameter : 16-40mm

?Application : pipe

?Material : PVC

?Voltage : 220v/380v

?Screw diameter: 51mm

?Capacity : 120KG/H

?Certification : CE UL

Description:

1,? Production flow

Raw material+agencw----------mixing---loader-----force feeding-------extrusion------------extrusion mould—

vacuum forming tank---spray cooling tank—oil printer---haul-off---cutter----stacker?

2,Each part machinery\'s function introduction

(1),raw material mixing: is PVC stabilizers, plasticizers, antioxidants and other accessories, scale,

technology has added into a high-speed mixer, the material and mechanical friction material from

temperature to set the process temperature, and then the cold mixing machine material to 40-50 degrees;

this can be added to the extruder hopper.
?

(2),The extruder portion: the machine equipped with a quantitative feeding device, so that the extrusion

amount and feeding amount can be matched, to ensure that the products stable extrusion. Due to the

characteristics of conical screw, a feeding section having a larger diameter, the material heat transfer area

and the shear velocity is relatively large, is conducive to the plastics materials in metering section of screw,

small diameter, reducing the heat transfer area and on the shear rate of melt, the melt at lower

temperatures and extrusion. Screw in the barrel rotates, the PVC mixture plasticizing to head, thereby

achieving compaction, melting, mixing and homogenizing; exhaust gas, dehydration of. The feeding device

and a screw drive device with variable frequency speed control, can realize the synchronous speed control.

(3),Extrusion die head part : by compaction, melting, mixing of PVC, with follow-up materials by the screw to

die, extrusion die head is the key part of the pipe forming

(4),Vacuum shaping water tank for pipes, cooling stereotypes, stereotypes water tank is provided with a

vacuum for shaping and cooling of the vacuum system and a water circulating system, stainless steel tank,

circulating water spray cooling, vacuum shaping water tank is provided with a mobile device, and left and

right height regulating manual device.

(5),hauling ?machine for continuously, automatically and is cooled to harden the pipes from the head out,

variable frequency speed regulation

(6),Cutting machine: by the travel switch according to the length required control, automatic cutting, and

delay over the frame, implementation of water production, cutting machine with permanent switch signal for

instruction, complete the cutting process, the cutting process and pipe running to maintain synchronization,

cutting process by the electric and pneumatic drive, cutting machine is provided with a dust suction device,

the cutting chips produced by timely aspirate, and recovery

(7),stacker: material turning movement from the cylinder through the gas path control to achieve erection,

turning a limit device, when the cutting saw to cut the pipe, pipe to transport, after time delay, the cylinder

into the work, realize the turning action, reach the discharging purpose. After unloading, the delay of

several seconds automatic reset, waiting for the next cycle.

Specifications: